Your contact at BIKAR

BIKAR Metals companies

Back to homepage

Your contact at BIKAR

Delivery program

All products

Reset Delivery program
An image of the material CW021A from the material Copper in the shape machined rolled plate both sides PVC rolled

CW021A | machined rolled plate both sides PVC rolled

  • Material: Copper
  • Material chemically EN 573-3: SE-Cu (Cu-HCP)

very good cold forming,good hot forming,good resistance in natural atmosphere (also sea air) and industrial atmosphere,practically insensitive to stress corrosion cracking
An image of the material special brass CW708R from the material Brass in the shape Round bar

special brass CW708R | Round bar

  • Material: Brass
  • Material chemically EN 573-3: SoMs68 / CuZn31Si1

Good cold forming properties,increased tarnish resistance,excellent corrosion resistance to engine and gear oils
An image of the material CW024A from the material Copper in the shape circular blank

CW024A | circular blank

  • Material: Copper
  • Material chemically EN 573-3: SF-Cu

very good cold forming and good hot forming properties,good resistance in natural atmosphere (also sea air) and industrial atmosphere
An image of the material EN AW-7075 from the material Aluminum in the shape square bar

EN AW-7075 | square bar

  • Material: Aluminum
  • DIN: 3.4365
  • Material chemically EN 573-3: Al Zn5,5 Mg Cu

Curable alloy with very high strength,Very high fatigue strength,good machinability
An image of the material EN AW-7075 from the material Aluminum in the shape plate - forged

EN AW-7075 | plate - forged

  • Material: Aluminum
  • DIN: 3.4365
  • Material chemically EN 573-3: Al Zn5,5 Mg Cu

Curable alloy with very high strength,Very high fatigue strength,good machinability
An image of the material CW452K from the material Bronze in the shape ring

CW452K | ring

  • Material: Bronze
  • Material chemically EN 573-3: Bronze Cu Sn 6

Good cold forming and limited hot forming from 750 to 850 degrees.,CuSn6 has good resistance to seawater, various agents and industrial atmospheres and is very good tarnish resistant
An image of the material EN AW-6082 from the material Aluminum in the shape Ring - machined surface

FORMODAL BM-6082 Walzplatte | Ring - machined surface

EN AW-6082

  • Material: Aluminum
  • DIN: 3.2315
  • Material chemically EN 573-3: Al Si1 Mg Mn

 Good corrosion resistance , Good welding properties ,Curable alloy , Good machinability 
An image of the material CW352H from the material Bronze in the shape Round bar

CW352H | Round bar

  • Material: Bronze
  • Material chemically EN 573-3: Cu Ni 10 Fe 1 Mn

Very good cold forming and good hot forming.,Copper-nickel alloys are among the most corrosion-resistant copper materials,Resistant to moisture, non-oxidising acids, alkalis and salt solutions, organic acids and dry gases such as oxygen, chlorine, hydrogen chloride, hydrogen fluoride, sulphur dioxide and carbon dioxide.
An image of the material FORMODAL®07 from the material Aluminum in the shape ring

FORMODAL®07 | ring

  • Material: Aluminum
  • DIN: 3.0255
  • Material chemically EN 573-3: 1050A (Al99,5)

Precision milled or rough sawn aluminium cast plates ,Very good anodising properties ,Very good corrosion resistance, Low stress and dimensionally stable ,Good welding properties ,Very high electrical conductivity as well as thermal conductivity 
An image of the material CW452K from the material Bronze in the shape circular blank

CW452K | circular blank

  • Material: Bronze
  • Material chemically EN 573-3: Bronze Cu Sn 6

Good cold forming and limited hot forming from 750 to 850 degrees.,CuSn6 has good resistance to seawater, various agents and industrial atmospheres and is very good tarnish resistant