EVERYTHING with tradition
Delivery program

Your contact at BIKAR

BIKAR Metals companies

Back to homepage

Your contact at BIKAR

Delivery program

All products

Reset Delivery program
An image of the material FORMODAL® 036 high-strength from the material Aluminum in the shape circular blank

FORMODAL® 036 high-strength | circular blank

  • Material: Aluminum
  • DIN: -
  • Material chemically EN 573-3: FORMODAL 036-Guss nach Art 7021

High-strength aluminum cast plates, Very good dimensional stability, Low internal stresses, Good welding properties, Good corrosion resistance
An image of the material Red brass CC493K from the material Bronze in the shape flat bar

Red brass CC493K | flat bar

  • Material: Bronze
  • Material chemically EN 573-3: Rg 7/Cu Sn7 Zn Pb

Good corrosion resistance against atmospheric influences
An image of the material FORMODAL® 023 from the material Aluminum in the shape Ring - machined surface

FORMODAL 030 | Ring - machined surface

FORMODAL® 023

  • Material: Aluminum
  • DIN: 3.3547
  • Material chemically EN 573-3: AlMg4,5Mn0,7

Cast plates , Very good machinability , Excellent corrosion resistance , Good welding properties , Low stress and dimensionally stable
An image of the material EN AW-1050A from the material Aluminum in the shape sheet rolled

EN AW-1050A | sheet rolled

  • Material: Aluminum
  • DIN: 3.0255
  • Material chemically EN 573-3: Al99,5

Very good weldability, Very good corrosion resistance to normal atmosphere, Very high electrical and thermal conductivity, Very good anodizing properties, also decorative, Very good formability
An image of the material FORMODAL® 023 from the material Aluminum in the shape Plate one side milled

FORMODAL® 023 | Plate one side milled

  • Material: Aluminum
  • DIN: 3.3547
  • Material chemically EN 573-3: AlMg4,5Mn0,7

Cast plates , Very good machinability , Excellent corrosion resistance , Good welding properties , Low stress and dimensionally stable
An image of the material FORMODAL® 023 from the material Aluminum in the shape cast plate machined surface - additional annealed - unfoiled

FORMODAL® 023 | cast plate machined surface - additional annealed - unfoiled

  • Material: Aluminum
  • DIN: 3.3547
  • Material chemically EN 573-3: AlMg4,5Mn0,7

Cast plates , Very good machinability , Excellent corrosion resistance , Good welding properties , Low stress and dimensionally stable
An image of the material CW021A from the material Copper in the shape sheet rolled

CW021A | sheet rolled

  • Material: Copper
  • Material chemically EN 573-3: SE-Cu (Cu-HCP)

very good cold forming, good hot forming, good resistance in natural atmosphere (also sea air) and industrial atmosphere, practically insensitive to stress corrosion cracking
An image of the material EN AW-5454 from the material Aluminum in the shape sheet rolled

EN AW-5454 | sheet rolled

  • Material: Aluminum
  • DIN: 3.3537
  • Material chemically EN 573-3: Aluminium Al Mg3 Mn

Non-heat treatable alloy (NHT), with medium mechanical properties, High fatigue strength, Very suitable for use in the food industry, Good cold formability in soft annealed condition: O
An image of the material Red brass CC493K from the material Bronze in the shape cast plate - all sides sawn

Red brass CC493K | cast plate - all sides sawn

  • Material: Bronze
  • Material chemically EN 573-3: Rg 7/Cu Sn7 Zn Pb

Good corrosion resistance against atmospheric influences
An image of the material CW106C from the material Copper in the shape Round bar

CW106C | Round bar

  • Material: Copper
  • Material chemically EN 573-3: Cu Cr1 Zr