Our factories
Production
Innovation
Our semi-finished products
Certification
Sustainability
Trade fairs & events
FAQ
EN AW-5454
sheet rolled
- Form sheet rolled
- Material Aluminum
- Material EN AW-5454
- Material chemically EN 573-3 Aluminium Al Mg3 Mn
- DIN 3.3537
BIKAR Metals companies
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| Aviation | No |
| Be (from) | 0 |
| Be (to) | 0 |
| Co (from) | 0 |
| Co (to) | 0 |
| Cr (from) | 0.05 |
| Cr (to) | 0.2 |
| Cu (to) | 0.1 |
| Fe (to) | 0.4 |
| Mg (from) | 2.4 |
| Mg (to) | 3 |
| Mn (from) | 0.5 |
| Mn (to) | 1 |
| Other | max. 0,05 |
| Rest | Al |
| Si (to) | 0.25 |
| Ti (to) | 0.2 |
| Total | max. 0,15 a) b) |
| Zn (to) | 0.25 |
a) Schließt alle aufgeführten Elemente ein, für die keine Grenzwerte angegeben sind. b) Die Summe dieser "Anderen Beimengungen", deren Masseanteil einzeln 0,010 % oder mehr beträgt, wird mit zwei Dezimalstellen vor der Summenbildung ausgedrückt.
| Normal atmosphere | 1.5 |
| Seawater atmosphere | 2 |
| Laser cutting | 4 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Drop forging | 2 |
| Extruding | 3.5 |
| Open die forging | 2 |
| Press | 2 |
| Upsetting (Conditional) | 2 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions |
Ofen, unkontolliert. Mit Temperatur ist Metalltemperatur gemeint. Um eine gute Planheit nach dem Glühen zu erreichen ist zu empfehlen unter Belastung zu glühen. |
| Material chemically EN 573-3 | Aluminium Al Mg3 Mn |
| DIN | 3.3537 |
| DIN (old designation) | AlMg2,7Mn |
| France AFNOR | NF-A-G2,5MC |
| Italy UNI | 9005/3 [P-AlMg2,7MnCr] |
| Spain | L-3391 [Al-3MgMn] |
| United Kingdom BS | BS-N51 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 23.7 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.9 K⁻¹10⁻⁶ |
| Density | 2.68 g/cm³ |
| Electrical conductivity max. | 21 m/Ω*mm² |
| Electrical conductivity min. | 19 m/Ω*mm² |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 5 |
| Soft soldering with flux | 5 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
1 very good
2 good
3 moderate
4 poor
5 unsuited
0 Not specified
