Our factories
Production
Innovation
Our semi-finished products
Certification
Sustainability
Trade fairs & events
FAQ
EN AW-1050A
sheet rolled
- Form sheet rolled
- Material Aluminum
- Material EN AW-1050A
- Material chemically EN 573-3 Al99,5
- DIN 3.0255
BIKAR Metals companies
Deep-drawing, spinning and sheet metal formed parts
Parts with decorative surface
Automotive parts
Coverings in machine and plant construction
Food industry
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cu (to) | 0.05 |
| Fe (to) | 0.4 |
| Mg (to) | 0.05 |
| Mn (to) | 0.05 |
| Other | 0,03 |
| Rest | Aluminium |
| Si (to) | 0.25 |
| Ti (to) | 0.05 |
| Zn (to) | 0.07 |
a) Includes all listed elements for which no limits are specified. b) The sum of these "Other Additions" whose mass fraction is individually 0.010% or more is expressed with two decimal places before the summation. (c) For unalloyed aluminum not produced by refining, the aluminum mass fraction is the difference between 100.00% and the sum of all other metallic elements present in the order of 0.010% or more by mass individually, with two decimal places before summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 2 |
| Seawater atmosphere | 2 |
| suitable according to DIN EN 602 | Yes |
| Bending | 1 |
| Deep drawing (conditional) | 1 |
| Deep drawing conditions | H14 |
| Drop forging | 1 |
| Extruding | 1 |
| Impact extrusion | 1 |
| Press | 1 |
| Upsetting (Conditional) | 1 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 0.5 h |
| Annealing temperature max. | 350 °C |
| Annealing temperature min. | 320 °C |
| Cooling conditions | uncontrolled |
| cold worked | 3 |
| dimensional stability | 1 |
| Eroding | 1 |
| soft annealed | 4 |
| Colorcode | Signalschwarz (RAL 9004), Verkehrsrot (RAL 3020) |
| Material chemically EN 573-3 | Al99,5 |
| DIN | 3.0255 |
| DIN (old designation) | Al99,5 |
| France AFNOR | A5 |
| Italy UNI | 9001/2 |
| Norway | 17,010 |
| Spain | L-3051 |
| Sweden | 144,007 |
| United Kingdom BS | 1B |
| Polishing | 1 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.4 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.7 K⁻¹10⁻⁶ |
| Density | 2.7 g/cm³ |
| Electrical conductivity max. | 36 m/Ω*mm² |
| Electrical conductivity min. | 34 m/Ω*mm² |
| Modulus of elasticity | 69 GPa |
| Shear modulus | 25.9 GPa |
| Specific heat | 900 J/(kg·K) |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 210 W/m*K |
| Brazing | 1 |
| Brazing with flux | 1 |
| Friction soldering | 1 |
| Soft soldering with flux | 1 |
| Gas | 2 |
| MIG | 2 |
| Resistance spot welding | 4 |
| TIG | 2 |
| welding additives |
|
1 very good
2 good
3 moderate
4 poor
5 unsuited
0 Not specified
