Our factories
Production
Innovation
Our semi-finished products
Certification
Sustainability
Trade fairs & events
FAQ
FORMODAL® BM-400 rolled
plate - forged
- Form plate - forged
- Material Aluminum
- Material FORMODAL® BM-400 rolled
- Material chemically EN 573-3 FORMODAL BM-400
- DIN -
BIKAR Metals companies
Tool making, mould making and model making
Blow moulds and injection moulds
Laminating tools
Moulds for elastomer materials
Moulds and heat-stressed parts
Moulds with welded construction
Refrigeration technology
| Aviation | No |
| Cr (to) | 0.05 |
| Cu (from) | 5.8 |
| Cu (to) | 6.8 |
| Fe (to) | 0.4 |
| Mg (to) | 0.1 |
| Mn (from) | 0.2 |
| Mn (to) | 0.4 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Ti (from) | 0.02 |
| Ti (to) | 0.1 |
| Total | 0,15 |
| Zn (to) | 0.1 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 5 |
| Anodising - protective anodising | 2 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 3 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4.5 |
| Normal atmosphere | 3 |
| Seawater atmosphere | 3 |
| Laser cutting | 3.5 |
| Plasma cutting | 3 |
| Sawing | 1 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 5 |
| Deep drawing (conditional) | 5 |
| Drop forging | 5 |
| Extruding | 5 |
| Impact extrusion | 5 |
| Open die forging | 5 |
| Press | 5 |
| Upsetting (Conditional) | 5 |
| dimensional stability | 2 |
| Eroding | 1 |
| Etching | 2 |
| hardened | 2 |
| Photo etching | 2 |
| Material chemically EN 573-3 | FORMODAL BM-400 |
| DIN | - |
| DIN (old designation) | - |
| France AFNOR | - |
| Italy UNI | - |
| Norway | - |
| Spain | - |
| Sweden | - |
| United Kingdom BS | - |
| Blasting | 1 |
| Brushing | 2 |
| Grinding | 2 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 5 |
| Laminating | 2 |
| Coefficient of thermal expansion from 20 to 100°C | 22.5 K⁻¹10⁻⁶ |
| Density | 2.84 g/cm³ |
| Electrical conductivity min. | 17.4 m/Ω*mm² |
| Modulus of elasticity | 73.8 GPa |
| Specific heat | 864 J/(kg·K) |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 4.5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 2 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.05 |
| Cu (from) | 5.8 |
| Cu (to) | 6.8 |
| Fe (to) | 0.4 |
| Mg (to) | 0.1 |
| Mn (from) | 0.2 |
| Mn (to) | 0.4 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Ti (from) | 0.02 |
| Ti (to) | 0.1 |
| Total | 0,15 |
| Zn (to) | 0.1 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 5 |
| Anodising - protective anodising | 2 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 3 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4.5 |
| Normal atmosphere | 3 |
| Seawater atmosphere | 3 |
| Laser cutting | 3.5 |
| Plasma cutting | 3 |
| Sawing | 1 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 5 |
| Deep drawing (conditional) | 5 |
| Drop forging | 5 |
| Extruding | 5 |
| Impact extrusion | 5 |
| Open die forging | 5 |
| Press | 5 |
| Upsetting (Conditional) | 5 |
| dimensional stability | 2 |
| Eroding | 1 |
| Etching | 2 |
| hardened | 2 |
| Photo etching | 2 |
| Material chemically EN 573-3 | FORMODAL BM-400 |
| DIN | - |
| DIN (old designation) | - |
| France AFNOR | - |
| Italy UNI | - |
| Norway | - |
| Spain | - |
| Sweden | - |
| United Kingdom BS | - |
| Blasting | 1 |
| Brushing | 2 |
| Grinding | 2 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 5 |
| Laminating | 2 |
| Coefficient of thermal expansion from 20 to 100°C | 22.5 K⁻¹10⁻⁶ |
| Density | 2.84 g/cm³ |
| Electrical conductivity min. | 17.4 m/Ω*mm² |
| Modulus of elasticity | 73.8 GPa |
| Specific heat | 864 J/(kg·K) |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 4.5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 2 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.05 |
| Cu (from) | 5.8 |
| Cu (to) | 6.8 |
| Fe (to) | 0.4 |
| Mg (to) | 0.1 |
| Mn (from) | 0.2 |
| Mn (to) | 0.4 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Ti (from) | 0.02 |
| Ti (to) | 0.1 |
| Total | 0,15 |
| Zn (to) | 0.1 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 5 |
| Anodising - protective anodising | 2 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 3 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4.5 |
| Normal atmosphere | 3 |
| Seawater atmosphere | 3 |
| Laser cutting | 3.5 |
| Plasma cutting | 3 |
| Sawing | 1 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 5 |
| Deep drawing (conditional) | 5 |
| Drop forging | 5 |
| Extruding | 5 |
| Impact extrusion | 5 |
| Open die forging | 5 |
| Press | 5 |
| Upsetting (Conditional) | 5 |
| dimensional stability | 2 |
| Eroding | 1 |
| Etching | 2 |
| hardened | 2 |
| Photo etching | 2 |
| Material chemically EN 573-3 | FORMODAL BM-400 |
| DIN | - |
| DIN (old designation) | - |
| France AFNOR | - |
| Italy UNI | - |
| Norway | - |
| Spain | - |
| Sweden | - |
| United Kingdom BS | - |
| Blasting | 1 |
| Brushing | 2 |
| Grinding | 2 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 5 |
| Laminating | 2 |
| Coefficient of thermal expansion from 20 to 100°C | 22.5 K⁻¹10⁻⁶ |
| Density | 2.84 g/cm³ |
| Electrical conductivity min. | 17.4 m/Ω*mm² |
| Modulus of elasticity | 73.8 GPa |
| Specific heat | 864 J/(kg·K) |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 4.5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 2 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.05 |
| Cu (from) | 5.8 |
| Cu (to) | 6.8 |
| Fe (to) | 0.4 |
| Mg (to) | 0.1 |
| Mn (from) | 0.2 |
| Mn (to) | 0.4 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Ti (from) | 0.02 |
| Ti (to) | 0.1 |
| Total | 0,15 |
| Zn (to) | 0.1 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 5 |
| Anodising - protective anodising | 2 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 3 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4.5 |
| Normal atmosphere | 3 |
| Seawater atmosphere | 3 |
| Laser cutting | 3.5 |
| Plasma cutting | 3 |
| Sawing | 1 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 5 |
| Deep drawing (conditional) | 5 |
| Drop forging | 5 |
| Extruding | 5 |
| Impact extrusion | 5 |
| Open die forging | 5 |
| Press | 5 |
| Upsetting (Conditional) | 5 |
| dimensional stability | 2 |
| Eroding | 1 |
| Etching | 2 |
| hardened | 2 |
| Photo etching | 2 |
| Material chemically EN 573-3 | FORMODAL BM-400 |
| DIN | - |
| DIN (old designation) | - |
| France AFNOR | - |
| Italy UNI | - |
| Norway | - |
| Spain | - |
| Sweden | - |
| United Kingdom BS | - |
| Blasting | 1 |
| Brushing | 2 |
| Grinding | 2 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 5 |
| Laminating | 2 |
| Coefficient of thermal expansion from 20 to 100°C | 22.5 K⁻¹10⁻⁶ |
| Density | 2.84 g/cm³ |
| Electrical conductivity min. | 17.4 m/Ω*mm² |
| Modulus of elasticity | 73.8 GPa |
| Specific heat | 864 J/(kg·K) |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 4.5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 2 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.05 |
| Cu (from) | 5.8 |
| Cu (to) | 6.8 |
| Fe (to) | 0.4 |
| Mg (to) | 0.1 |
| Mn (from) | 0.2 |
| Mn (to) | 0.4 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Ti (from) | 0.02 |
| Ti (to) | 0.1 |
| Total | 0,15 |
| Zn (to) | 0.1 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 5 |
| Anodising - protective anodising | 2 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 3 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4.5 |
| Normal atmosphere | 3 |
| Seawater atmosphere | 3 |
| Laser cutting | 3.5 |
| Plasma cutting | 3 |
| Sawing | 1 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 5 |
| Deep drawing (conditional) | 5 |
| Drop forging | 5 |
| Extruding | 5 |
| Impact extrusion | 5 |
| Open die forging | 5 |
| Press | 5 |
| Upsetting (Conditional) | 5 |
| dimensional stability | 2 |
| Eroding | 1 |
| Etching | 2 |
| hardened | 2 |
| Photo etching | 2 |
| Material chemically EN 573-3 | FORMODAL BM-400 |
| DIN | - |
| DIN (old designation) | - |
| France AFNOR | - |
| Italy UNI | - |
| Norway | - |
| Spain | - |
| Sweden | - |
| United Kingdom BS | - |
| Blasting | 1 |
| Brushing | 2 |
| Grinding | 2 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 5 |
| Laminating | 2 |
| Coefficient of thermal expansion from 20 to 100°C | 22.5 K⁻¹10⁻⁶ |
| Density | 2.84 g/cm³ |
| Electrical conductivity min. | 17.4 m/Ω*mm² |
| Modulus of elasticity | 73.8 GPa |
| Specific heat | 864 J/(kg·K) |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 4.5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 2 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.05 |
| Cu (from) | 5.8 |
| Cu (to) | 6.8 |
| Fe (to) | 0.4 |
| Mg (to) | 0.1 |
| Mn (from) | 0.2 |
| Mn (to) | 0.4 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Ti (from) | 0.02 |
| Ti (to) | 0.1 |
| Total | 0,15 |
| Zn (to) | 0.1 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 5 |
| Anodising - protective anodising | 2 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 3 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4.5 |
| Normal atmosphere | 3 |
| Seawater atmosphere | 3 |
| Laser cutting | 3.5 |
| Plasma cutting | 3 |
| Sawing | 1 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 5 |
| Deep drawing (conditional) | 5 |
| Drop forging | 5 |
| Extruding | 5 |
| Impact extrusion | 5 |
| Open die forging | 5 |
| Press | 5 |
| Upsetting (Conditional) | 5 |
| dimensional stability | 2 |
| Eroding | 1 |
| Etching | 2 |
| hardened | 2 |
| Photo etching | 2 |
| Material chemically EN 573-3 | FORMODAL BM-400 |
| DIN | - |
| DIN (old designation) | - |
| France AFNOR | - |
| Italy UNI | - |
| Norway | - |
| Spain | - |
| Sweden | - |
| United Kingdom BS | - |
| Blasting | 1 |
| Brushing | 2 |
| Grinding | 2 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 5 |
| Laminating | 2 |
| Coefficient of thermal expansion from 20 to 100°C | 22.5 K⁻¹10⁻⁶ |
| Density | 2.84 g/cm³ |
| Electrical conductivity min. | 17.4 m/Ω*mm² |
| Modulus of elasticity | 73.8 GPa |
| Specific heat | 864 J/(kg·K) |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 4.5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 2 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.05 |
| Cu (from) | 5.8 |
| Cu (to) | 6.8 |
| Fe (to) | 0.4 |
| Mg (to) | 0.1 |
| Mn (from) | 0.2 |
| Mn (to) | 0.4 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Ti (from) | 0.02 |
| Ti (to) | 0.1 |
| Total | 0,15 |
| Zn (to) | 0.1 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 5 |
| Anodising - protective anodising | 2 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 3 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4.5 |
| Normal atmosphere | 3 |
| Seawater atmosphere | 3 |
| Laser cutting | 3.5 |
| Plasma cutting | 3 |
| Sawing | 1 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 5 |
| Deep drawing (conditional) | 5 |
| Drop forging | 5 |
| Extruding | 5 |
| Impact extrusion | 5 |
| Open die forging | 5 |
| Press | 5 |
| Upsetting (Conditional) | 5 |
| dimensional stability | 2 |
| Eroding | 1 |
| Etching | 2 |
| hardened | 2 |
| Photo etching | 2 |
| Material chemically EN 573-3 | FORMODAL BM-400 |
| DIN | - |
| DIN (old designation) | - |
| France AFNOR | - |
| Italy UNI | - |
| Norway | - |
| Spain | - |
| Sweden | - |
| United Kingdom BS | - |
| Blasting | 1 |
| Brushing | 2 |
| Grinding | 2 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 5 |
| Laminating | 2 |
| Coefficient of thermal expansion from 20 to 100°C | 22.5 K⁻¹10⁻⁶ |
| Density | 2.84 g/cm³ |
| Electrical conductivity min. | 17.4 m/Ω*mm² |
| Modulus of elasticity | 73.8 GPa |
| Specific heat | 864 J/(kg·K) |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 4.5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 2 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.05 |
| Cu (from) | 5.8 |
| Cu (to) | 6.8 |
| Fe (to) | 0.4 |
| Mg (to) | 0.1 |
| Mn (from) | 0.2 |
| Mn (to) | 0.4 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Ti (from) | 0.02 |
| Ti (to) | 0.1 |
| Total | 0,15 |
| Zn (to) | 0.1 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 5 |
| Anodising - protective anodising | 2 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 3 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4.5 |
| Normal atmosphere | 3 |
| Seawater atmosphere | 3 |
| Laser cutting | 3.5 |
| Plasma cutting | 3 |
| Sawing | 1 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 5 |
| Deep drawing (conditional) | 5 |
| Drop forging | 5 |
| Extruding | 5 |
| Impact extrusion | 5 |
| Open die forging | 5 |
| Press | 5 |
| Upsetting (Conditional) | 5 |
| dimensional stability | 2 |
| Eroding | 1 |
| Etching | 2 |
| hardened | 2 |
| Photo etching | 2 |
| Material chemically EN 573-3 | FORMODAL BM-400 |
| DIN | - |
| DIN (old designation) | - |
| France AFNOR | - |
| Italy UNI | - |
| Norway | - |
| Spain | - |
| Sweden | - |
| United Kingdom BS | - |
| Blasting | 1 |
| Brushing | 2 |
| Grinding | 2 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 5 |
| Laminating | 2 |
| Coefficient of thermal expansion from 20 to 100°C | 22.5 K⁻¹10⁻⁶ |
| Density | 2.84 g/cm³ |
| Electrical conductivity min. | 17.4 m/Ω*mm² |
| Modulus of elasticity | 73.8 GPa |
| Specific heat | 864 J/(kg·K) |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 4.5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 2 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.05 |
| Cu (from) | 5.8 |
| Cu (to) | 6.8 |
| Fe (to) | 0.4 |
| Mg (to) | 0.1 |
| Mn (from) | 0.2 |
| Mn (to) | 0.4 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Ti (from) | 0.02 |
| Ti (to) | 0.1 |
| Total | 0,15 |
| Zn (to) | 0.1 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 5 |
| Anodising - protective anodising | 2 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 3 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4.5 |
| Normal atmosphere | 3 |
| Seawater atmosphere | 3 |
| Laser cutting | 3.5 |
| Plasma cutting | 3 |
| Sawing | 1 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 5 |
| Deep drawing (conditional) | 5 |
| Drop forging | 5 |
| Extruding | 5 |
| Impact extrusion | 5 |
| Open die forging | 5 |
| Press | 5 |
| Upsetting (Conditional) | 5 |
| dimensional stability | 2 |
| Eroding | 1 |
| Etching | 2 |
| hardened | 2 |
| Photo etching | 2 |
| Material chemically EN 573-3 | FORMODAL BM-400 |
| DIN | - |
| DIN (old designation) | - |
| France AFNOR | - |
| Italy UNI | - |
| Norway | - |
| Spain | - |
| Sweden | - |
| United Kingdom BS | - |
| Blasting | 1 |
| Brushing | 2 |
| Grinding | 2 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 5 |
| Laminating | 2 |
| Coefficient of thermal expansion from 20 to 100°C | 22.5 K⁻¹10⁻⁶ |
| Density | 2.84 g/cm³ |
| Electrical conductivity min. | 17.4 m/Ω*mm² |
| Modulus of elasticity | 73.8 GPa |
| Specific heat | 864 J/(kg·K) |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 4.5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 2 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.05 |
| Cu (from) | 5.8 |
| Cu (to) | 6.8 |
| Fe (to) | 0.4 |
| Mg (to) | 0.1 |
| Mn (from) | 0.2 |
| Mn (to) | 0.4 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Ti (from) | 0.02 |
| Ti (to) | 0.1 |
| Total | 0,15 |
| Zn (to) | 0.1 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 5 |
| Anodising - protective anodising | 2 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 3 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4.5 |
| Normal atmosphere | 3 |
| Seawater atmosphere | 3 |
| Laser cutting | 3.5 |
| Plasma cutting | 3 |
| Sawing | 1 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 5 |
| Deep drawing (conditional) | 5 |
| Drop forging | 5 |
| Extruding | 5 |
| Impact extrusion | 5 |
| Open die forging | 5 |
| Press | 5 |
| Upsetting (Conditional) | 5 |
| dimensional stability | 2 |
| Eroding | 1 |
| Etching | 2 |
| hardened | 2 |
| Photo etching | 2 |
| Material chemically EN 573-3 | FORMODAL BM-400 |
| DIN | - |
| DIN (old designation) | - |
| France AFNOR | - |
| Italy UNI | - |
| Norway | - |
| Spain | - |
| Sweden | - |
| United Kingdom BS | - |
| Blasting | 1 |
| Brushing | 2 |
| Grinding | 2 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 5 |
| Laminating | 2 |
| Coefficient of thermal expansion from 20 to 100°C | 22.5 K⁻¹10⁻⁶ |
| Density | 2.84 g/cm³ |
| Electrical conductivity min. | 17.4 m/Ω*mm² |
| Modulus of elasticity | 73.8 GPa |
| Specific heat | 864 J/(kg·K) |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 4.5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 2 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.05 |
| Cu (from) | 5.8 |
| Cu (to) | 6.8 |
| Fe (to) | 0.4 |
| Mg (to) | 0.1 |
| Mn (from) | 0.2 |
| Mn (to) | 0.4 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Ti (from) | 0.02 |
| Ti (to) | 0.1 |
| Total | 0,15 |
| Zn (to) | 0.1 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 5 |
| Anodising - protective anodising | 2 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 3 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4.5 |
| Normal atmosphere | 3 |
| Seawater atmosphere | 3 |
| Laser cutting | 3.5 |
| Plasma cutting | 3 |
| Sawing | 1 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 5 |
| Deep drawing (conditional) | 5 |
| Drop forging | 5 |
| Extruding | 5 |
| Impact extrusion | 5 |
| Open die forging | 5 |
| Press | 5 |
| Upsetting (Conditional) | 5 |
| dimensional stability | 2 |
| Eroding | 1 |
| Etching | 2 |
| hardened | 2 |
| Photo etching | 2 |
| Material chemically EN 573-3 | FORMODAL BM-400 |
| DIN | - |
| DIN (old designation) | - |
| France AFNOR | - |
| Italy UNI | - |
| Norway | - |
| Spain | - |
| Sweden | - |
| United Kingdom BS | - |
| Blasting | 1 |
| Brushing | 2 |
| Grinding | 2 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 5 |
| Laminating | 2 |
| Coefficient of thermal expansion from 20 to 100°C | 22.5 K⁻¹10⁻⁶ |
| Density | 2.84 g/cm³ |
| Electrical conductivity min. | 17.4 m/Ω*mm² |
| Modulus of elasticity | 73.8 GPa |
| Specific heat | 864 J/(kg·K) |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 4.5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 2 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.05 |
| Cu (from) | 5.8 |
| Cu (to) | 6.8 |
| Fe (to) | 0.4 |
| Mg (to) | 0.1 |
| Mn (from) | 0.2 |
| Mn (to) | 0.4 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Ti (from) | 0.02 |
| Ti (to) | 0.1 |
| Total | 0,15 |
| Zn (to) | 0.1 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 5 |
| Anodising - protective anodising | 2 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 3 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4.5 |
| Normal atmosphere | 3 |
| Seawater atmosphere | 3 |
| Laser cutting | 3.5 |
| Plasma cutting | 3 |
| Sawing | 1 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 5 |
| Deep drawing (conditional) | 5 |
| Drop forging | 5 |
| Extruding | 5 |
| Impact extrusion | 5 |
| Open die forging | 5 |
| Press | 5 |
| Upsetting (Conditional) | 5 |
| dimensional stability | 2 |
| Eroding | 1 |
| Etching | 2 |
| hardened | 2 |
| Photo etching | 2 |
| Material chemically EN 573-3 | FORMODAL BM-400 |
| DIN | - |
| DIN (old designation) | - |
| France AFNOR | - |
| Italy UNI | - |
| Norway | - |
| Spain | - |
| Sweden | - |
| United Kingdom BS | - |
| Blasting | 1 |
| Brushing | 2 |
| Grinding | 2 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 5 |
| Laminating | 2 |
| Coefficient of thermal expansion from 20 to 100°C | 22.5 K⁻¹10⁻⁶ |
| Density | 2.84 g/cm³ |
| Electrical conductivity min. | 17.4 m/Ω*mm² |
| Modulus of elasticity | 73.8 GPa |
| Specific heat | 864 J/(kg·K) |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 4.5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 2 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.05 |
| Cu (from) | 5.8 |
| Cu (to) | 6.8 |
| Fe (to) | 0.4 |
| Mg (to) | 0.1 |
| Mn (from) | 0.2 |
| Mn (to) | 0.4 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Ti (from) | 0.02 |
| Ti (to) | 0.1 |
| Total | 0,15 |
| Zn (to) | 0.1 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 5 |
| Anodising - protective anodising | 2 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 3 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4.5 |
| Normal atmosphere | 3 |
| Seawater atmosphere | 3 |
| Laser cutting | 3.5 |
| Plasma cutting | 3 |
| Sawing | 1 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 5 |
| Deep drawing (conditional) | 5 |
| Drop forging | 5 |
| Extruding | 5 |
| Impact extrusion | 5 |
| Open die forging | 5 |
| Press | 5 |
| Upsetting (Conditional) | 5 |
| dimensional stability | 2 |
| Eroding | 1 |
| Etching | 2 |
| hardened | 2 |
| Photo etching | 2 |
| Material chemically EN 573-3 | FORMODAL BM-400 |
| DIN | - |
| DIN (old designation) | - |
| France AFNOR | - |
| Italy UNI | - |
| Norway | - |
| Spain | - |
| Sweden | - |
| United Kingdom BS | - |
| Blasting | 1 |
| Brushing | 2 |
| Grinding | 2 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 5 |
| Laminating | 2 |
| Coefficient of thermal expansion from 20 to 100°C | 22.5 K⁻¹10⁻⁶ |
| Density | 2.84 g/cm³ |
| Electrical conductivity min. | 17.4 m/Ω*mm² |
| Modulus of elasticity | 73.8 GPa |
| Specific heat | 864 J/(kg·K) |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 4.5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 2 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.05 |
| Cu (from) | 5.8 |
| Cu (to) | 6.8 |
| Fe (to) | 0.4 |
| Mg (to) | 0.1 |
| Mn (from) | 0.2 |
| Mn (to) | 0.4 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Ti (from) | 0.02 |
| Ti (to) | 0.1 |
| Total | 0,15 |
| Zn (to) | 0.1 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 5 |
| Anodising - protective anodising | 2 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 3 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4.5 |
| Normal atmosphere | 3 |
| Seawater atmosphere | 3 |
| Laser cutting | 3.5 |
| Plasma cutting | 3 |
| Sawing | 1 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | No |
| Bending | 5 |
| Deep drawing (conditional) | 5 |
| Drop forging | 5 |
| Extruding | 5 |
| Impact extrusion | 5 |
| Open die forging | 5 |
| Press | 5 |
| Upsetting (Conditional) | 5 |
| dimensional stability | 2 |
| Eroding | 1 |
| Etching | 2 |
| hardened | 2 |
| Photo etching | 2 |
| Material chemically EN 573-3 | FORMODAL BM-400 |
| DIN | - |
| DIN (old designation) | - |
| France AFNOR | - |
| Italy UNI | - |
| Norway | - |
| Spain | - |
| Sweden | - |
| United Kingdom BS | - |
| Blasting | 1 |
| Brushing | 2 |
| Grinding | 2 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 5 |
| Laminating | 2 |
| Coefficient of thermal expansion from 20 to 100°C | 22.5 K⁻¹10⁻⁶ |
| Density | 2.84 g/cm³ |
| Electrical conductivity min. | 17.4 m/Ω*mm² |
| Modulus of elasticity | 73.8 GPa |
| Specific heat | 864 J/(kg·K) |
| Thermal conductivity min. | 130 W/m*K |
| Brazing | 5 |
| Brazing with flux | 5 |
| Soft soldering | 4.5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 2 |
| TIG | 2 |
| welding additives |
|
1 very good
2 good
3 moderate
4 poor
5 unsuited
0 Not specified
