TURNAL 6026LF

Round bar

[f06_003]
  • Form Round bar
  • Material Aluminum
  • Material TURNAL 6026LF
  • Material chemically EN 573-3 Al Mg Si Bi

No product available for your selection.

[f06_003]
[f06_003]

Information about the material

  • Aviation
    Aviation No
  • Chemical specifications
    Bi (from) 0.5
    Bi (to) 1.5
    Cr (to) 0.3
    Cu (from) 0.2
    Cu (to) 0.5
    Fe (to) 0.7
    Mg (from) 0.6
    Mg (to) 1.2
    Mn (from) 0.2
    Mn (to) 1
    Other 0,05
    Pb (from) 0.01
    Pb (to) 0.05
    Si (from) 0.6
    Si (to) 1.4
    Sn (to) 0.05
    Ti (to) 0.2
    Total 0,15
    Zn (to) 0.3

    max. 0,20 Ti + Zr

  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 2
  • Corrosion resistance
    Normal atmosphere 2
    Seawater atmosphere 3
  • Food industry
    suitable according to DIN EN 602 No
  • Machining / Machinability
    hardened 2
  • Material
    Material chemically EN 573-3 Al Mg Si Bi
  • Organic coating
    Painting / Coating 2
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.4 K⁻¹10⁻⁶
    Density 2.72 g/cm³
    Electrical conductivity min. 26 m/Ω*mm²
    Modulus of elasticity 69,000 GPa
    Thermal conductivity min. 172 W/m*K
  • Soldering
    Brazing 3
    Brazing with flux 3
  • Welding
    MIG 2
    Resistance spot welding 2
  • Aviation
    Aviation No
  • Chemical specifications
    Bi (from) 0.5
    Bi (to) 1.5
    Cr (to) 0.3
    Cu (from) 0.2
    Cu (to) 0.5
    Fe (to) 0.7
    Mg (from) 0.6
    Mg (to) 1.2
    Mn (from) 0.2
    Mn (to) 1
    Other 0,05
    Pb (from) 0.01
    Pb (to) 0.05
    Si (from) 0.6
    Si (to) 1.4
    Sn (to) 0.05
    Ti (to) 0.2
    Total 0,15
    Zn (to) 0.3

    max. 0,20 Ti + Zr

  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 2
  • Corrosion resistance
    Normal atmosphere 2
    Seawater atmosphere 3
  • Food industry
    suitable according to DIN EN 602 No
  • Machining / Machinability
    hardened 2
  • Material
    Material chemically EN 573-3 Al Mg Si Bi
  • Organic coating
    Painting / Coating 2
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.4 K⁻¹10⁻⁶
    Density 2.72 g/cm³
    Electrical conductivity min. 26 m/Ω*mm²
    Modulus of elasticity 69,000 GPa
    Thermal conductivity min. 172 W/m*K
  • Soldering
    Brazing 3
    Brazing with flux 3
  • Welding
    MIG 2
    Resistance spot welding 2
  • Aviation
    Aviation No
  • Chemical specifications
    Bi (from) 0.5
    Bi (to) 1.5
    Cr (to) 0.3
    Cu (from) 0.2
    Cu (to) 0.5
    Fe (to) 0.7
    Mg (from) 0.6
    Mg (to) 1.2
    Mn (from) 0.2
    Mn (to) 1
    Other 0,05
    Pb (from) 0.01
    Pb (to) 0.05
    Si (from) 0.6
    Si (to) 1.4
    Sn (to) 0.05
    Ti (to) 0.2
    Total 0,15
    Zn (to) 0.3

    max. 0,20 Ti + Zr

  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 2
  • Corrosion resistance
    Normal atmosphere 2
    Seawater atmosphere 3
  • Food industry
    suitable according to DIN EN 602 No
  • Machining / Machinability
    hardened 2
  • Material
    Material chemically EN 573-3 Al Mg Si Bi
  • Organic coating
    Painting / Coating 2
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.4 K⁻¹10⁻⁶
    Density 2.72 g/cm³
    Electrical conductivity min. 26 m/Ω*mm²
    Modulus of elasticity 69,000 GPa
    Thermal conductivity min. 172 W/m*K
  • Soldering
    Brazing 3
    Brazing with flux 3
  • Welding
    MIG 2
    Resistance spot welding 2
  • Aviation
    Aviation No
  • Chemical specifications
    Bi (from) 0.5
    Bi (to) 1.5
    Cr (to) 0.3
    Cu (from) 0.2
    Cu (to) 0.5
    Fe (to) 0.7
    Mg (from) 0.6
    Mg (to) 1.2
    Mn (from) 0.2
    Mn (to) 1
    Other 0,05
    Pb (from) 0.01
    Pb (to) 0.05
    Si (from) 0.6
    Si (to) 1.4
    Sn (to) 0.05
    Ti (to) 0.2
    Total 0,15
    Zn (to) 0.3

    max. 0,20 Ti + Zr

  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 2
  • Corrosion resistance
    Normal atmosphere 2
    Seawater atmosphere 3
  • Food industry
    suitable according to DIN EN 602 No
  • Machining / Machinability
    hardened 2
  • Material
    Material chemically EN 573-3 Al Mg Si Bi
  • Organic coating
    Painting / Coating 2
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.4 K⁻¹10⁻⁶
    Density 2.72 g/cm³
    Electrical conductivity min. 26 m/Ω*mm²
    Modulus of elasticity 69,000 GPa
    Thermal conductivity min. 172 W/m*K
  • Soldering
    Brazing 3
    Brazing with flux 3
  • Welding
    MIG 2
    Resistance spot welding 2
  • Aviation
    Aviation No
  • Chemical specifications
    Bi (from) 0.5
    Bi (to) 1.5
    Cr (to) 0.3
    Cu (from) 0.2
    Cu (to) 0.5
    Fe (to) 0.7
    Mg (from) 0.6
    Mg (to) 1.2
    Mn (from) 0.2
    Mn (to) 1
    Other 0,05
    Pb (from) 0.01
    Pb (to) 0.05
    Si (from) 0.6
    Si (to) 1.4
    Sn (to) 0.05
    Ti (to) 0.2
    Total 0,15
    Zn (to) 0.3

    max. 0,20 Ti + Zr

  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 2
  • Corrosion resistance
    Normal atmosphere 2
    Seawater atmosphere 3
  • Food industry
    suitable according to DIN EN 602 No
  • Machining / Machinability
    hardened 2
  • Material
    Material chemically EN 573-3 Al Mg Si Bi
  • Organic coating
    Painting / Coating 2
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.4 K⁻¹10⁻⁶
    Density 2.72 g/cm³
    Electrical conductivity min. 26 m/Ω*mm²
    Modulus of elasticity 69,000 GPa
    Thermal conductivity min. 172 W/m*K
  • Soldering
    Brazing 3
    Brazing with flux 3
  • Welding
    MIG 2
    Resistance spot welding 2
  • Aviation
    Aviation No
  • Chemical specifications
    Bi (from) 0.5
    Bi (to) 1.5
    Cr (to) 0.3
    Cu (from) 0.2
    Cu (to) 0.5
    Fe (to) 0.7
    Mg (from) 0.6
    Mg (to) 1.2
    Mn (from) 0.2
    Mn (to) 1
    Other 0,05
    Pb (from) 0.01
    Pb (to) 0.05
    Si (from) 0.6
    Si (to) 1.4
    Sn (to) 0.05
    Ti (to) 0.2
    Total 0,15
    Zn (to) 0.3

    max. 0,20 Ti + Zr

  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 2
  • Corrosion resistance
    Normal atmosphere 2
    Seawater atmosphere 3
  • Food industry
    suitable according to DIN EN 602 No
  • Machining / Machinability
    hardened 2
  • Material
    Material chemically EN 573-3 Al Mg Si Bi
  • Organic coating
    Painting / Coating 2
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.4 K⁻¹10⁻⁶
    Density 2.72 g/cm³
    Electrical conductivity min. 26 m/Ω*mm²
    Modulus of elasticity 69,000 GPa
    Thermal conductivity min. 172 W/m*K
  • Soldering
    Brazing 3
    Brazing with flux 3
  • Welding
    MIG 2
    Resistance spot welding 2
  • Aviation
    Aviation No
  • Chemical specifications
    Bi (from) 0.5
    Bi (to) 1.5
    Cr (to) 0.3
    Cu (from) 0.2
    Cu (to) 0.5
    Fe (to) 0.7
    Mg (from) 0.6
    Mg (to) 1.2
    Mn (from) 0.2
    Mn (to) 1
    Other 0,05
    Pb (from) 0.01
    Pb (to) 0.05
    Si (from) 0.6
    Si (to) 1.4
    Sn (to) 0.05
    Ti (to) 0.2
    Total 0,15
    Zn (to) 0.3

    max. 0,20 Ti + Zr

  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 2
  • Corrosion resistance
    Normal atmosphere 2
    Seawater atmosphere 3
  • Food industry
    suitable according to DIN EN 602 No
  • Machining / Machinability
    hardened 2
  • Material
    Material chemically EN 573-3 Al Mg Si Bi
  • Organic coating
    Painting / Coating 2
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.4 K⁻¹10⁻⁶
    Density 2.72 g/cm³
    Electrical conductivity min. 26 m/Ω*mm²
    Modulus of elasticity 69,000 GPa
    Thermal conductivity min. 172 W/m*K
  • Soldering
    Brazing 3
    Brazing with flux 3
  • Welding
    MIG 2
    Resistance spot welding 2
  • Aviation
    Aviation No
  • Chemical specifications
    Bi (from) 0.5
    Bi (to) 1.5
    Cr (to) 0.3
    Cu (from) 0.2
    Cu (to) 0.5
    Fe (to) 0.7
    Mg (from) 0.6
    Mg (to) 1.2
    Mn (from) 0.2
    Mn (to) 1
    Other 0,05
    Pb (from) 0.01
    Pb (to) 0.05
    Si (from) 0.6
    Si (to) 1.4
    Sn (to) 0.05
    Ti (to) 0.2
    Total 0,15
    Zn (to) 0.3

    max. 0,20 Ti + Zr

  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 2
  • Corrosion resistance
    Normal atmosphere 2
    Seawater atmosphere 3
  • Food industry
    suitable according to DIN EN 602 No
  • Machining / Machinability
    hardened 2
  • Material
    Material chemically EN 573-3 Al Mg Si Bi
  • Organic coating
    Painting / Coating 2
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.4 K⁻¹10⁻⁶
    Density 2.72 g/cm³
    Electrical conductivity min. 26 m/Ω*mm²
    Modulus of elasticity 69,000 GPa
    Thermal conductivity min. 172 W/m*K
  • Soldering
    Brazing 3
    Brazing with flux 3
  • Welding
    MIG 2
    Resistance spot welding 2

1 very good
2 good
3 moderate
4 poor
5 unsuited
0 Not specified