CW352H

Round bar

[440_003]
  • Form Round bar
  • Material Bronze
  • Material CW352H
  • Material chemically EN 573-3 Cu Ni 10 Fe 1 Mn

No product available for your selection.

[440_003]
[440_003]

Areas of application

Seawater pipes

Pipes, plates and bottoms for fresh water heaters, petroleum refining plants, air-conditioning systems and apparatus engineering

Pipes, pipe linings, plates and bottoms for heat exchangers and condensers as well as feedwater heaters (low pressure)

Areas of application

Ship hull linings

highly stressed shut-off devices subject to corrosion and wear

line pipes for salt and other aggressive solutions

Areas of application

Intercoolers and oil coolers as well as honeycomb coolers in automobile and aircraft construction

Hydraulic and pneumatic lines in mechanical engineering

Feed water heaters and stirred tanks, pipes and apparatus for food packaging, conveying and processing

Features of this material

  • Very good cold forming and good hot forming.
  • Copper-nickel alloys are among the most corrosion-resistant copper materials
  • Resistant to moisture, non-oxidising acids, alkalis and salt solutions, organic acids and dry gases such as oxygen, chlorine, hydrogen chloride, hydrogen fluoride, sulphur dioxide and carbon dioxide.

Information about the material

  • Aviation
    Aviation No
  • Chemical specifications
    Co (from) 0.1
    Co (to) 0.1
    Cu (from) 86
    Cu (to) 89.7
    Fe (from) 1
    Fe (to) 2
    Mn (from) 0.5
    Mn (to) 1
    Ni (from) 9
    Ni (to) 11
    P (from) 0.02
    P (to) 0.02
    Pb (from) 0.02
    Pb (to) 0.02
    S (from) 0.05
    S (to) 0.05
    Sn (from) 0.03
    Sn (to) 0.03
    Zn (from) 0.5
    Zn (to) 0.5
  • Food industry
    suitable according to DIN EN 602 No
  • Material
    Material chemically EN 573-3 Cu Ni 10 Fe 1 Mn
    Material no CW352H (ehem.: 2.0872)
  • physical properties
    Coefficient of thermal expansion from 20 to 300°C 17 K⁻¹10⁻⁶
    Density 8.9 g/cm³
    Modulus of elasticity at 20°C 135 GPa
    Specific electrical conductivity at 20°C 5 m/Ω*mm²
    Specific electrical conductivity at 200°C 5 m/Ω*mm²
    Specific electrical resistance at 20°C 0.19 Ω*mm²/m
    Specific electrical resistance at 200°C 0.22 Ω*mm²/m
    Specific heat at 20°C 0.38 J/(kg·K)
    Thermal conductivity at 20°C 50.2 W/m*K
  • Soldering
    Brazing 1
    Soft soldering 1
  • Welding
    Gas 5
    MIG 1
    TIG 1
  • Aviation
    Aviation No
  • Chemical specifications
    Co (from) 0.1
    Co (to) 0.1
    Cu (from) 86
    Cu (to) 89.7
    Fe (from) 1
    Fe (to) 2
    Mn (from) 0.5
    Mn (to) 1
    Ni (from) 9
    Ni (to) 11
    P (from) 0.02
    P (to) 0.02
    Pb (from) 0.02
    Pb (to) 0.02
    S (from) 0.05
    S (to) 0.05
    Sn (from) 0.03
    Sn (to) 0.03
    Zn (from) 0.5
    Zn (to) 0.5
  • Food industry
    suitable according to DIN EN 602 No
  • Material
    Material chemically EN 573-3 Cu Ni 10 Fe 1 Mn
    Material no CW352H (ehem.: 2.0872)
  • physical properties
    Coefficient of thermal expansion from 20 to 300°C 17 K⁻¹10⁻⁶
    Density 8.9 g/cm³
    Modulus of elasticity at 20°C 135 GPa
    Specific electrical conductivity at 20°C 5 m/Ω*mm²
    Specific electrical conductivity at 200°C 5 m/Ω*mm²
    Specific electrical resistance at 20°C 0.19 Ω*mm²/m
    Specific electrical resistance at 200°C 0.22 Ω*mm²/m
    Specific heat at 20°C 0.38 J/(kg·K)
    Thermal conductivity at 20°C 50.2 W/m*K
  • Soldering
    Brazing 1
    Soft soldering 1
  • Welding
    Gas 5
    MIG 1
    TIG 1
  • Aviation
    Aviation No
  • Chemical specifications
    Co (from) 0.1
    Co (to) 0.1
    Cu (from) 86
    Cu (to) 89.7
    Fe (from) 1
    Fe (to) 2
    Mn (from) 0.5
    Mn (to) 1
    Ni (from) 9
    Ni (to) 11
    P (from) 0.02
    P (to) 0.02
    Pb (from) 0.02
    Pb (to) 0.02
    S (from) 0.05
    S (to) 0.05
    Sn (from) 0.03
    Sn (to) 0.03
    Zn (from) 0.5
    Zn (to) 0.5
  • Food industry
    suitable according to DIN EN 602 No
  • Material
    Material chemically EN 573-3 Cu Ni 10 Fe 1 Mn
    Material no CW352H (ehem.: 2.0872)
  • physical properties
    Coefficient of thermal expansion from 20 to 300°C 17 K⁻¹10⁻⁶
    Density 8.9 g/cm³
    Modulus of elasticity at 20°C 135 GPa
    Specific electrical conductivity at 20°C 5 m/Ω*mm²
    Specific electrical conductivity at 200°C 5 m/Ω*mm²
    Specific electrical resistance at 20°C 0.19 Ω*mm²/m
    Specific electrical resistance at 200°C 0.22 Ω*mm²/m
    Specific heat at 20°C 0.38 J/(kg·K)
    Thermal conductivity at 20°C 50.2 W/m*K
  • Soldering
    Brazing 1
    Soft soldering 1
  • Welding
    Gas 5
    MIG 1
    TIG 1
  • Aviation
    Aviation No
  • Chemical specifications
    Co (from) 0.1
    Co (to) 0.1
    Cu (from) 86
    Cu (to) 89.7
    Fe (from) 1
    Fe (to) 2
    Mn (from) 0.5
    Mn (to) 1
    Ni (from) 9
    Ni (to) 11
    P (from) 0.02
    P (to) 0.02
    Pb (from) 0.02
    Pb (to) 0.02
    S (from) 0.05
    S (to) 0.05
    Sn (from) 0.03
    Sn (to) 0.03
    Zn (from) 0.5
    Zn (to) 0.5
  • Food industry
    suitable according to DIN EN 602 No
  • Material
    Material chemically EN 573-3 Cu Ni 10 Fe 1 Mn
    Material no CW352H (ehem.: 2.0872)
  • physical properties
    Coefficient of thermal expansion from 20 to 300°C 17 K⁻¹10⁻⁶
    Density 8.9 g/cm³
    Modulus of elasticity at 20°C 135 GPa
    Specific electrical conductivity at 20°C 5 m/Ω*mm²
    Specific electrical conductivity at 200°C 5 m/Ω*mm²
    Specific electrical resistance at 20°C 0.19 Ω*mm²/m
    Specific electrical resistance at 200°C 0.22 Ω*mm²/m
    Specific heat at 20°C 0.38 J/(kg·K)
    Thermal conductivity at 20°C 50.2 W/m*K
  • Soldering
    Brazing 1
    Soft soldering 1
  • Welding
    Gas 5
    MIG 1
    TIG 1
  • Aviation
    Aviation No
  • Chemical specifications
    Co (from) 0.1
    Co (to) 0.1
    Cu (from) 86
    Cu (to) 89.7
    Fe (from) 1
    Fe (to) 2
    Mn (from) 0.5
    Mn (to) 1
    Ni (from) 9
    Ni (to) 11
    P (from) 0.02
    P (to) 0.02
    Pb (from) 0.02
    Pb (to) 0.02
    S (from) 0.05
    S (to) 0.05
    Sn (from) 0.03
    Sn (to) 0.03
    Zn (from) 0.5
    Zn (to) 0.5
  • Food industry
    suitable according to DIN EN 602 No
  • Material
    Material chemically EN 573-3 Cu Ni 10 Fe 1 Mn
    Material no CW352H (ehem.: 2.0872)
  • physical properties
    Coefficient of thermal expansion from 20 to 300°C 17 K⁻¹10⁻⁶
    Density 8.9 g/cm³
    Modulus of elasticity at 20°C 135 GPa
    Specific electrical conductivity at 20°C 5 m/Ω*mm²
    Specific electrical conductivity at 200°C 5 m/Ω*mm²
    Specific electrical resistance at 20°C 0.19 Ω*mm²/m
    Specific electrical resistance at 200°C 0.22 Ω*mm²/m
    Specific heat at 20°C 0.38 J/(kg·K)
    Thermal conductivity at 20°C 50.2 W/m*K
  • Soldering
    Brazing 1
    Soft soldering 1
  • Welding
    Gas 5
    MIG 1
    TIG 1
  • Aviation
    Aviation No
  • Chemical specifications
    Co (from) 0.1
    Co (to) 0.1
    Cu (from) 86
    Cu (to) 89.7
    Fe (from) 1
    Fe (to) 2
    Mn (from) 0.5
    Mn (to) 1
    Ni (from) 9
    Ni (to) 11
    P (from) 0.02
    P (to) 0.02
    Pb (from) 0.02
    Pb (to) 0.02
    S (from) 0.05
    S (to) 0.05
    Sn (from) 0.03
    Sn (to) 0.03
    Zn (from) 0.5
    Zn (to) 0.5
  • Food industry
    suitable according to DIN EN 602 No
  • Material
    Material chemically EN 573-3 Cu Ni 10 Fe 1 Mn
    Material no CW352H (ehem.: 2.0872)
  • physical properties
    Coefficient of thermal expansion from 20 to 300°C 17 K⁻¹10⁻⁶
    Density 8.9 g/cm³
    Modulus of elasticity at 20°C 135 GPa
    Specific electrical conductivity at 20°C 5 m/Ω*mm²
    Specific electrical conductivity at 200°C 5 m/Ω*mm²
    Specific electrical resistance at 20°C 0.19 Ω*mm²/m
    Specific electrical resistance at 200°C 0.22 Ω*mm²/m
    Specific heat at 20°C 0.38 J/(kg·K)
    Thermal conductivity at 20°C 50.2 W/m*K
  • Soldering
    Brazing 1
    Soft soldering 1
  • Welding
    Gas 5
    MIG 1
    TIG 1

1 very good
2 good
3 moderate
4 poor
5 unsuited
0 Not specified