UNIDAL AA7019

Ring - machined surface

A technical illustration of the product with dimensions of the material UNIDAL AA7019 from the material Aluminum in the shape Ring -  machined surface
  • Form Ring - machined surface
  • Material Aluminum
  • Material UNIDAL AA7019
  • Material chemically EN 573-3 Al Zn4 Mg2 Mn
  • DIN 3.4325

No product available for your selection.

An image of the material UNIDAL AA7019 from the material Aluminum in the shape Ring -  machined surface

Information about the material

  • Aviation
    Aviation No
  • Chemical specifications
    Be (from) 0
    Be (to) 0
    Cr (from) 0.1
    Cr (to) 0.2
    Cu (to) 0.2
    Fe (to) 0.45
    Mg (from) 1.5
    Mg (to) 2.5
    Mn (from) 0.15
    Mn (to) 0.5
    Rest Aluminium
    Si (to) 0.35
    Ti (from) 0.1
    Ti (to) 0.4
    Zn (from) 3.5
    Zn (to) 4.5
    Ti + Cr 0,10 – 0,40
  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 1
    Chromating 2
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
  • Corrosion resistance
    Normal atmosphere 2
    Seawater atmosphere 3
  • Cutting
    Laser cutting 3
    Plasma cutting 2
    Sawing 1
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 No
  • Forming
    Bending 5
    Deep drawing (conditional) 5
    Impact extrusion 5
    Press 5
    Upsetting (Conditional) 5
  • Heat treatment - Softannealing
    Heating time min. 0.5 h
    Annealing temperature min. 350 °C
    Cooling conditions ≤ 30°C/h bis 250°C,
    unterhalb 250°C an der Luft
  • Machining / Machinability
    dimensional stability 1
    Eroding 1
    Etching 2
    hardened 1
    Photo etching 1
  • Material
    Material chemically EN 573-3 Al Zn4 Mg2 Mn
    DIN 3.4325
    DIN (old designation) Al Zn4,5 Mg1
    France AFNOR -
    Italy UNI -
    Norway -
    Spain -
    Sweden -
    United Kingdom BS -
  • Mechanical surface treatment
    Blasting 1
    Brushing 2
    Grinding 2
    Polishing 1
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 5
    Laminating 2
    Painting / Coating 1
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.6 K⁻¹10⁻⁶
    Density 2.75 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 19 m/Ω*mm²
    Modulus of elasticity 71 GPa
    Thermal conductivity max. 150 W/m*K
    Thermal conductivity min. 135 W/m*K
  • Soldering
    Brazing 5
    Brazing with flux 5
    Soft soldering 5
    Soft soldering with flux 4
  • Welding
    Friction stir welding 2
    Friction welding 2
    Laser 2
    MIG 2
    Plasma 2
    Resistance spot welding 2
    TIG 2
    welding additives

    • S-Al 5183
    • S-Al 5356

  • Aviation
    Aviation No
  • Chemical specifications
    Be (from) 0
    Be (to) 0
    Cr (from) 0.1
    Cr (to) 0.2
    Cu (to) 0.2
    Fe (to) 0.45
    Mg (from) 1.5
    Mg (to) 2.5
    Mn (from) 0.15
    Mn (to) 0.5
    Rest Aluminium
    Si (to) 0.35
    Ti (from) 0.1
    Ti (to) 0.4
    Zn (from) 3.5
    Zn (to) 4.5
    Ti + Cr 0,10 – 0,40
  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 1
    Chromating 2
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
  • Corrosion resistance
    Normal atmosphere 2
    Seawater atmosphere 3
  • Cutting
    Laser cutting 3
    Plasma cutting 2
    Sawing 1
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 No
  • Forming
    Bending 5
    Deep drawing (conditional) 5
    Impact extrusion 5
    Press 5
    Upsetting (Conditional) 5
  • Heat treatment - Softannealing
    Heating time min. 0.5 h
    Annealing temperature min. 350 °C
    Cooling conditions ≤ 30°C/h bis 250°C,
    unterhalb 250°C an der Luft
  • Machining / Machinability
    dimensional stability 1
    Eroding 1
    Etching 2
    hardened 1
    Photo etching 1
  • Material
    Material chemically EN 573-3 Al Zn4 Mg2 Mn
    DIN 3.4325
    DIN (old designation) Al Zn4,5 Mg1
    France AFNOR -
    Italy UNI -
    Norway -
    Spain -
    Sweden -
    United Kingdom BS -
  • Mechanical surface treatment
    Blasting 1
    Brushing 2
    Grinding 2
    Polishing 1
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 5
    Laminating 2
    Painting / Coating 1
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.6 K⁻¹10⁻⁶
    Density 2.75 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 19 m/Ω*mm²
    Modulus of elasticity 71 GPa
    Thermal conductivity max. 150 W/m*K
    Thermal conductivity min. 135 W/m*K
  • Soldering
    Brazing 5
    Brazing with flux 5
    Soft soldering 5
    Soft soldering with flux 4
  • Welding
    Friction stir welding 2
    Friction welding 2
    Laser 2
    MIG 2
    Plasma 2
    Resistance spot welding 2
    TIG 2
    welding additives

    • S-Al 5183
    • S-Al 5356

  • Aviation
    Aviation No
  • Chemical specifications
    Be (from) 0
    Be (to) 0
    Cr (from) 0.1
    Cr (to) 0.2
    Cu (to) 0.2
    Fe (to) 0.45
    Mg (from) 1.5
    Mg (to) 2.5
    Mn (from) 0.15
    Mn (to) 0.5
    Rest Aluminium
    Si (to) 0.35
    Ti (from) 0.1
    Ti (to) 0.4
    Zn (from) 3.5
    Zn (to) 4.5
    Ti + Cr 0,10 – 0,40
  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 1
    Chromating 2
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
  • Corrosion resistance
    Normal atmosphere 2
    Seawater atmosphere 3
  • Cutting
    Laser cutting 3
    Plasma cutting 2
    Sawing 1
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 No
  • Forming
    Bending 5
    Deep drawing (conditional) 5
    Impact extrusion 5
    Press 5
    Upsetting (Conditional) 5
  • Heat treatment - Softannealing
    Heating time min. 0.5 h
    Annealing temperature min. 350 °C
    Cooling conditions ≤ 30°C/h bis 250°C,
    unterhalb 250°C an der Luft
  • Machining / Machinability
    dimensional stability 1
    Eroding 1
    Etching 2
    hardened 1
    Photo etching 1
  • Material
    Material chemically EN 573-3 Al Zn4 Mg2 Mn
    DIN 3.4325
    DIN (old designation) Al Zn4,5 Mg1
    France AFNOR -
    Italy UNI -
    Norway -
    Spain -
    Sweden -
    United Kingdom BS -
  • Mechanical surface treatment
    Blasting 1
    Brushing 2
    Grinding 2
    Polishing 1
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 5
    Laminating 2
    Painting / Coating 1
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.6 K⁻¹10⁻⁶
    Density 2.75 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 19 m/Ω*mm²
    Modulus of elasticity 71 GPa
    Thermal conductivity max. 150 W/m*K
    Thermal conductivity min. 135 W/m*K
  • Soldering
    Brazing 5
    Brazing with flux 5
    Soft soldering 5
    Soft soldering with flux 4
  • Welding
    Friction stir welding 2
    Friction welding 2
    Laser 2
    MIG 2
    Plasma 2
    Resistance spot welding 2
    TIG 2
    welding additives

    • S-Al 5183
    • S-Al 5356

  • Aviation
    Aviation No
  • Chemical specifications
    Be (from) 0
    Be (to) 0
    Cr (from) 0.1
    Cr (to) 0.2
    Cu (to) 0.2
    Fe (to) 0.45
    Mg (from) 1.5
    Mg (to) 2.5
    Mn (from) 0.15
    Mn (to) 0.5
    Rest Aluminium
    Si (to) 0.35
    Ti (from) 0.1
    Ti (to) 0.4
    Zn (from) 3.5
    Zn (to) 4.5
    Ti + Cr 0,10 – 0,40
  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 1
    Chromating 2
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
  • Corrosion resistance
    Normal atmosphere 2
    Seawater atmosphere 3
  • Cutting
    Laser cutting 3
    Plasma cutting 2
    Sawing 1
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 No
  • Forming
    Bending 5
    Deep drawing (conditional) 5
    Impact extrusion 5
    Press 5
    Upsetting (Conditional) 5
  • Heat treatment - Softannealing
    Heating time min. 0.5 h
    Annealing temperature min. 350 °C
    Cooling conditions ≤ 30°C/h bis 250°C,
    unterhalb 250°C an der Luft
  • Machining / Machinability
    dimensional stability 1
    Eroding 1
    Etching 2
    hardened 1
    Photo etching 1
  • Material
    Material chemically EN 573-3 Al Zn4 Mg2 Mn
    DIN 3.4325
    DIN (old designation) Al Zn4,5 Mg1
    France AFNOR -
    Italy UNI -
    Norway -
    Spain -
    Sweden -
    United Kingdom BS -
  • Mechanical surface treatment
    Blasting 1
    Brushing 2
    Grinding 2
    Polishing 1
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 5
    Laminating 2
    Painting / Coating 1
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.6 K⁻¹10⁻⁶
    Density 2.75 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 19 m/Ω*mm²
    Modulus of elasticity 71 GPa
    Thermal conductivity max. 150 W/m*K
    Thermal conductivity min. 135 W/m*K
  • Soldering
    Brazing 5
    Brazing with flux 5
    Soft soldering 5
    Soft soldering with flux 4
  • Welding
    Friction stir welding 2
    Friction welding 2
    Laser 2
    MIG 2
    Plasma 2
    Resistance spot welding 2
    TIG 2
    welding additives

    • S-Al 5183
    • S-Al 5356

  • Aviation
    Aviation No
  • Chemical specifications
    Be (from) 0
    Be (to) 0
    Cr (from) 0.1
    Cr (to) 0.2
    Cu (to) 0.2
    Fe (to) 0.45
    Mg (from) 1.5
    Mg (to) 2.5
    Mn (from) 0.15
    Mn (to) 0.5
    Rest Aluminium
    Si (to) 0.35
    Ti (from) 0.1
    Ti (to) 0.4
    Zn (from) 3.5
    Zn (to) 4.5
    Ti + Cr 0,10 – 0,40
  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 1
    Chromating 2
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
  • Corrosion resistance
    Normal atmosphere 2
    Seawater atmosphere 3
  • Cutting
    Laser cutting 3
    Plasma cutting 2
    Sawing 1
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 No
  • Forming
    Bending 5
    Deep drawing (conditional) 5
    Impact extrusion 5
    Press 5
    Upsetting (Conditional) 5
  • Heat treatment - Softannealing
    Heating time min. 0.5 h
    Annealing temperature min. 350 °C
    Cooling conditions ≤ 30°C/h bis 250°C,
    unterhalb 250°C an der Luft
  • Machining / Machinability
    dimensional stability 1
    Eroding 1
    Etching 2
    hardened 1
    Photo etching 1
  • Material
    Material chemically EN 573-3 Al Zn4 Mg2 Mn
    DIN 3.4325
    DIN (old designation) Al Zn4,5 Mg1
    France AFNOR -
    Italy UNI -
    Norway -
    Spain -
    Sweden -
    United Kingdom BS -
  • Mechanical surface treatment
    Blasting 1
    Brushing 2
    Grinding 2
    Polishing 1
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 5
    Laminating 2
    Painting / Coating 1
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.6 K⁻¹10⁻⁶
    Density 2.75 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 19 m/Ω*mm²
    Modulus of elasticity 71 GPa
    Thermal conductivity max. 150 W/m*K
    Thermal conductivity min. 135 W/m*K
  • Soldering
    Brazing 5
    Brazing with flux 5
    Soft soldering 5
    Soft soldering with flux 4
  • Welding
    Friction stir welding 2
    Friction welding 2
    Laser 2
    MIG 2
    Plasma 2
    Resistance spot welding 2
    TIG 2
    welding additives

    • S-Al 5183
    • S-Al 5356

1 very good
2 good
3 moderate
4 poor
5 unsuited
0 Not specified