Your contact at BIKAR

BIKAR Metals companies

Back to homepage

Your contact at BIKAR

Delivery program

EN AW-2007

tube - round as bar

A technical illustration of the product with dimensions of the material EN AW-2007 from the material Aluminum in the shape tube - round as bar
  • Form tube - round as bar
  • Material Aluminum
  • Material EN AW-2007
  • Material chemically EN 573-3 Al Cu4 Pb Mg Mn
  • DIN 3.1645

No product available for your selection.

You can find an overview of all standard dimensions here in our stock list.
Request drawing part
An image of the material EN AW-2007 from the material Aluminum in the shape tube - round as bar
A technical illustration of the product of the material EN AW-2007 from the material Aluminum in the shape tube - round as bar

Areas of application

Machine and fixture construction

Turned and milled parts

Screws, nuts

Features of this material

  • Good machinable, short-chipping drilling and turning quality (free-cutting alloy)
  • Hardenable
  • Relatively high strength values

Information about the material

  • Aviation
    Aviation No
  • Chemical specifications
    Be (from) 0
    Be (to) 0
    Bi (to) 0.2
    Co (from) 0
    Co (to) 0
    Cr (to) 0.1
    Cu (from) 3.3
    Cu (to) 4.6
    Fe (to) 0.8
    Mg (from) 0.4
    Mg (to) 1.8
    Mn (from) 0.5
    Mn (to) 1
    Ni (to) 0.2
    Other 0,10
    Pb (from) 0.8
    Pb (to) 1.5
    Rest Aluminium
    Si (to) 0.8
    Sn (to) 0.8
    Ti (to) 0.2
    Total 0,30
    Zn (to) 0.8
    0,20 Bi • 0,80 – 1,5 Pb • 0,20 Sn
  • Chemical surface treatment
    Anodise - decorative 5
    Anodising - protective anodising 4.5
    Chromating 2
    Cleaning / degreasing 2
    Hard anodising 3
    Phosphating 2
    Pickling 2
    Shining 4.5
  • Corrosion resistance
    Normal atmosphere 4.5
    Seawater atmosphere 4.5
  • Cutting
    Laser cutting 4.5
    Plasma cutting 4.5
    Sawing 1
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 No
  • Forming
    Bending 4.5
    Extruding 4
    Press conditions O/H111
    Upsetting (Conditional) 4.5
  • Heat treatment - Softannealing
    Heating time max. 2 h
    Heating time min. 1 h
    Annealing temperature max. 420 °C
    Annealing temperature min. 380 °C
    Cooling conditions Cooling conditions 30°C/h to
    250°C, below 250°C in air
  • Heat treatment - Solution annealing
    Cold ageing max. 8 d
    Cold ageing min. 5 d
    Heat ageing min. 16 h
    Heating temperature min. 160 °C
    Quenching water to 65°C
    Solution annealing max. 490 °C
    Solution annealing min. 480 °C
  • Machining / Machinability
    dimensional stability 2
    Eroding 1
    Etching 2
    hardened 1
    Photo etching 2
  • Material
    Colorcode Signalschwarz (RAL 9004)
    Material chemically EN 573-3 Al Cu4 Pb Mg Mn
    DIN 3.1645
    DIN (old designation) Al Cu Mg Pb
    France AFNOR -
    Italy UNI 9002/8
    Norway 17,110
    Spain -
    Sweden -
    United Kingdom BS -
  • Mechanical surface treatment
    Blasting 1
    Brushing 2
    Grinding 2
    Polishing 3
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4.5
  • Organic coating
    Enamelling 4.5
    Laminating 2
    Painting / Coating 4
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23 K⁻¹10⁻⁶
    Density 2.85 g/cm³
    Electrical conductivity max. 22 m/Ω*mm²
    Electrical conductivity min. 18 m/Ω*mm²
    Modulus of elasticity 72.5 GPa
    Shear modulus 27.3 GPa
    Specific heat 860 J/(kg·K)
    Thermal conductivity max. 160 W/m*K
    Thermal conductivity min. 130 W/m*K
  • Soldering
    Brazing 5
    Brazing with flux 5
    Friction soldering 4.5
  • Welding
    Friction stir welding 5
    Friction welding 5
    Laser 5
    Plasma 5
  • Aviation
    Aviation No
  • Chemical specifications
    Be (from) 0
    Be (to) 0
    Bi (to) 0.2
    Co (from) 0
    Co (to) 0
    Cr (to) 0.1
    Cu (from) 3.3
    Cu (to) 4.6
    Fe (to) 0.8
    Mg (from) 0.4
    Mg (to) 1.8
    Mn (from) 0.5
    Mn (to) 1
    Ni (to) 0.2
    Other 0,10
    Pb (from) 0.8
    Pb (to) 1.5
    Rest Aluminium
    Si (to) 0.8
    Sn (to) 0.8
    Ti (to) 0.2
    Total 0,30
    Zn (to) 0.8
    0,20 Bi • 0,80 – 1,5 Pb • 0,20 Sn
  • Chemical surface treatment
    Anodise - decorative 5
    Anodising - protective anodising 4.5
    Chromating 2
    Cleaning / degreasing 2
    Hard anodising 3
    Phosphating 2
    Pickling 2
    Shining 4.5
  • Corrosion resistance
    Normal atmosphere 4.5
    Seawater atmosphere 4.5
  • Cutting
    Laser cutting 4.5
    Plasma cutting 4.5
    Sawing 1
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 No
  • Forming
    Bending 4.5
    Extruding 4
    Press conditions O/H111
    Upsetting (Conditional) 4.5
  • Heat treatment - Softannealing
    Heating time max. 2 h
    Heating time min. 1 h
    Annealing temperature max. 420 °C
    Annealing temperature min. 380 °C
    Cooling conditions Cooling conditions 30°C/h to
    250°C, below 250°C in air
  • Heat treatment - Solution annealing
    Cold ageing max. 8 d
    Cold ageing min. 5 d
    Heat ageing min. 16 h
    Heating temperature min. 160 °C
    Quenching water to 65°C
    Solution annealing max. 490 °C
    Solution annealing min. 480 °C
  • Machining / Machinability
    dimensional stability 2
    Eroding 1
    Etching 2
    hardened 1
    Photo etching 2
  • Material
    Colorcode Signalschwarz (RAL 9004)
    Material chemically EN 573-3 Al Cu4 Pb Mg Mn
    DIN 3.1645
    DIN (old designation) Al Cu Mg Pb
    France AFNOR -
    Italy UNI 9002/8
    Norway 17,110
    Spain -
    Sweden -
    United Kingdom BS -
  • Mechanical surface treatment
    Blasting 1
    Brushing 2
    Grinding 2
    Polishing 3
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4.5
  • Organic coating
    Enamelling 4.5
    Laminating 2
    Painting / Coating 4
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23 K⁻¹10⁻⁶
    Density 2.85 g/cm³
    Electrical conductivity max. 22 m/Ω*mm²
    Electrical conductivity min. 18 m/Ω*mm²
    Modulus of elasticity 72.5 GPa
    Shear modulus 27.3 GPa
    Specific heat 860 J/(kg·K)
    Thermal conductivity max. 160 W/m*K
    Thermal conductivity min. 130 W/m*K
  • Soldering
    Brazing 5
    Brazing with flux 5
    Friction soldering 4.5
  • Welding
    Friction stir welding 5
    Friction welding 5
    Laser 5
    Plasma 5
  • Aviation
    Aviation No
  • Chemical specifications
    Be (from) 0
    Be (to) 0
    Bi (to) 0.2
    Co (from) 0
    Co (to) 0
    Cr (to) 0.1
    Cu (from) 3.3
    Cu (to) 4.6
    Fe (to) 0.8
    Mg (from) 0.4
    Mg (to) 1.8
    Mn (from) 0.5
    Mn (to) 1
    Ni (to) 0.2
    Other 0,10
    Pb (from) 0.8
    Pb (to) 1.5
    Rest Aluminium
    Si (to) 0.8
    Sn (to) 0.8
    Ti (to) 0.2
    Total 0,30
    Zn (to) 0.8
    0,20 Bi • 0,80 – 1,5 Pb • 0,20 Sn
  • Chemical surface treatment
    Anodise - decorative 5
    Anodising - protective anodising 4.5
    Chromating 2
    Cleaning / degreasing 2
    Hard anodising 3
    Phosphating 2
    Pickling 2
    Shining 4.5
  • Corrosion resistance
    Normal atmosphere 4.5
    Seawater atmosphere 4.5
  • Cutting
    Laser cutting 4.5
    Plasma cutting 4.5
    Sawing 1
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 No
  • Forming
    Bending 4.5
    Extruding 4
    Press conditions O/H111
    Upsetting (Conditional) 4.5
  • Heat treatment - Softannealing
    Heating time max. 2 h
    Heating time min. 1 h
    Annealing temperature max. 420 °C
    Annealing temperature min. 380 °C
    Cooling conditions Cooling conditions 30°C/h to
    250°C, below 250°C in air
  • Heat treatment - Solution annealing
    Cold ageing max. 8 d
    Cold ageing min. 5 d
    Heat ageing min. 16 h
    Heating temperature min. 160 °C
    Quenching water to 65°C
    Solution annealing max. 490 °C
    Solution annealing min. 480 °C
  • Machining / Machinability
    dimensional stability 2
    Eroding 1
    Etching 2
    hardened 1
    Photo etching 2
  • Material
    Colorcode Signalschwarz (RAL 9004)
    Material chemically EN 573-3 Al Cu4 Pb Mg Mn
    DIN 3.1645
    DIN (old designation) Al Cu Mg Pb
    France AFNOR -
    Italy UNI 9002/8
    Norway 17,110
    Spain -
    Sweden -
    United Kingdom BS -
  • Mechanical surface treatment
    Blasting 1
    Brushing 2
    Grinding 2
    Polishing 3
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4.5
  • Organic coating
    Enamelling 4.5
    Laminating 2
    Painting / Coating 4
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23 K⁻¹10⁻⁶
    Density 2.85 g/cm³
    Electrical conductivity max. 22 m/Ω*mm²
    Electrical conductivity min. 18 m/Ω*mm²
    Modulus of elasticity 72.5 GPa
    Shear modulus 27.3 GPa
    Specific heat 860 J/(kg·K)
    Thermal conductivity max. 160 W/m*K
    Thermal conductivity min. 130 W/m*K
  • Soldering
    Brazing 5
    Brazing with flux 5
    Friction soldering 4.5
  • Welding
    Friction stir welding 5
    Friction welding 5
    Laser 5
    Plasma 5
  • Aviation
    Aviation No
  • Chemical specifications
    Be (from) 0
    Be (to) 0
    Bi (to) 0.2
    Co (from) 0
    Co (to) 0
    Cr (to) 0.1
    Cu (from) 3.3
    Cu (to) 4.6
    Fe (to) 0.8
    Mg (from) 0.4
    Mg (to) 1.8
    Mn (from) 0.5
    Mn (to) 1
    Ni (to) 0.2
    Other 0,10
    Pb (from) 0.8
    Pb (to) 1.5
    Rest Aluminium
    Si (to) 0.8
    Sn (to) 0.8
    Ti (to) 0.2
    Total 0,30
    Zn (to) 0.8
    0,20 Bi • 0,80 – 1,5 Pb • 0,20 Sn
  • Chemical surface treatment
    Anodise - decorative 5
    Anodising - protective anodising 4.5
    Chromating 2
    Cleaning / degreasing 2
    Hard anodising 3
    Phosphating 2
    Pickling 2
    Shining 4.5
  • Corrosion resistance
    Normal atmosphere 4.5
    Seawater atmosphere 4.5
  • Cutting
    Laser cutting 4.5
    Plasma cutting 4.5
    Sawing 1
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 No
  • Forming
    Bending 4.5
    Extruding 4
    Press conditions O/H111
    Upsetting (Conditional) 4.5
  • Heat treatment - Softannealing
    Heating time max. 2 h
    Heating time min. 1 h
    Annealing temperature max. 420 °C
    Annealing temperature min. 380 °C
    Cooling conditions Cooling conditions 30°C/h to
    250°C, below 250°C in air
  • Heat treatment - Solution annealing
    Cold ageing max. 8 d
    Cold ageing min. 5 d
    Heat ageing min. 16 h
    Heating temperature min. 160 °C
    Quenching water to 65°C
    Solution annealing max. 490 °C
    Solution annealing min. 480 °C
  • Machining / Machinability
    dimensional stability 2
    Eroding 1
    Etching 2
    hardened 1
    Photo etching 2
  • Material
    Colorcode Signalschwarz (RAL 9004)
    Material chemically EN 573-3 Al Cu4 Pb Mg Mn
    DIN 3.1645
    DIN (old designation) Al Cu Mg Pb
    France AFNOR -
    Italy UNI 9002/8
    Norway 17,110
    Spain -
    Sweden -
    United Kingdom BS -
  • Mechanical surface treatment
    Blasting 1
    Brushing 2
    Grinding 2
    Polishing 3
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4.5
  • Organic coating
    Enamelling 4.5
    Laminating 2
    Painting / Coating 4
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23 K⁻¹10⁻⁶
    Density 2.85 g/cm³
    Electrical conductivity max. 22 m/Ω*mm²
    Electrical conductivity min. 18 m/Ω*mm²
    Modulus of elasticity 72.5 GPa
    Shear modulus 27.3 GPa
    Specific heat 860 J/(kg·K)
    Thermal conductivity max. 160 W/m*K
    Thermal conductivity min. 130 W/m*K
  • Soldering
    Brazing 5
    Brazing with flux 5
    Friction soldering 4.5
  • Welding
    Friction stir welding 5
    Friction welding 5
    Laser 5
    Plasma 5

1 very good
2 good
3 moderate
4 poor
5 unsuited
0 Not specified

More questions about BIKAR?

Information about BIKAR, our product range and our service can be found here:

ABOUT OUR COMPANY