Your contact at BIKAR

BIKAR Metals companies

Back to homepage

Your contact at BIKAR

Delivery program

EN AW-7020

tube - round as bar

A technical illustration of the product with dimensions of the material EN AW-7020 from the material Aluminum in the shape tube - round as bar
  • Form tube - round as bar
  • Material Aluminum
  • Material EN AW-7020
  • Material chemically EN 573-3 Al Zn4,5 Mg1
  • DIN 3.4335

No product available for your selection.

You can find an overview of all standard dimensions here in our stock list.
Request drawing part
An image of the material EN AW-7020 from the material Aluminum in the shape tube - round as bar
A technical illustration of the product of the material EN AW-7020 from the material Aluminum in the shape tube - round as bar

Areas of application

Railed vehicles

Military technology

Features of this material

  • Curable
  • Good welding properties
  • High strength

Features of this material

  • High fatigue strength

Information about the material

  • Aviation
    Aviation No
  • Chemical specifications
    Cr (from) 0.1
    Cr (to) 0.35
    Cu (to) 0.2
    Fe (to) 0.4
    Mg (from) 1
    Mg (to) 1.4
    Mn (from) 0.05
    Mn (to) 0.5
    Other 0,05
    Rest Aluminium
    Si (from) 0
    Si (to) 0.35
    Ti footnote reference a)
    Total 0,15
    Zn (from) 4
    Zn (to) 5
    Zr footnote reference a)

    0,08 – 0,25 Zr + Ti

  • Chemical surface treatment
    Anodise - decorative 3
    Anodising - protective anodising 2
    Chromating 2
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
  • Corrosion resistance
    Normal atmosphere 3
    Seawater atmosphere 4
  • Cutting
    Laser cutting 3
    Plasma cutting 3
    Sawing 2
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 No
  • Forming
    Bending 2
    Bending delivery conditions O
    Deep drawing (conditional) 2
    Deep drawing conditions O
    Drop forging 2
    Extruding 2
    Impact extrusion 3
    Impact extrusion conditions O
    Open die forging 2
    Press 3
    Press conditions O
    Upsetting (Conditional) 2
    Upsetting conditions O
  • Heat treatment - Softannealing
    Heating time max. 3 h
    Heating time min. 2 h
    Annealing temperature max. 420 °C
    Annealing temperature min. 400 °C
    Cooling conditions ≤ 30°C/h to 250°C + 3 – 5 hours
    hold time, below 250°C in air
  • Heat treatment - Solution annealing
    Quenching air
    Solution annealing max. 485 °C
    Solution annealing min. 460 °C
  • Machining / Machinability
    Eroding 1
    Etching 2
    hardened 2
    Photo etching 2
    soft annealed 3
  • Material
    Colorcode Hellrosa (RAL 3015)
    Material chemically EN 573-3 Al Zn4,5 Mg1
    DIN 3.4335
    DIN (old designation) Al Zn4,5 Mg1
    France AFNOR A-Z5G
    Italy UNI 9007/1
    Norway 17,410
    Spain L-3741
    Sweden 144,425
    United Kingdom BS H17
  • Mechanical surface treatment
    Blasting 1
    Brushing 2
    Dessinating 1
    Grinding 2
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 5
    Laminating 2
    Painting / Coating 2
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.1 K⁻¹10⁻⁶
    Coefficient of thermal expansion from 20 to 200°C 24 K⁻¹10⁻⁶
    Coefficient of thermal expansion from 20 to 300°C 25 K⁻¹10⁻⁶
    Coefficient of thermal expansion from -50 to 20°C 21.4 K⁻¹10⁻⁶
    Density 2.77 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 19 m/Ω*mm²
    Modulus of elasticity 70 GPa
    Shear modulus 26.4 GPa
    Specific heat 875 J/(kg·K)
    Thermal conductivity max. 160 W/m*K
    Thermal conductivity min. 130 W/m*K
  • Soldering
    Brazing 5
    Brazing with flux 5
    Friction soldering 3
    Soft soldering 5
    Soft soldering with flux 5
  • Welding
    Friction stir welding 2
    Friction welding 2
    Gas 3
    Laser 2
    MIG 1
    Resistance spot welding 5
    TIG 2
    welding additives

    • SG-Al Mg4,5 Mn
    • SG-Al Mg4,5 Mn Zr
    • SG-Al Mg5
  • Aviation
    Aviation No
  • Chemical specifications
    Cr (from) 0.1
    Cr (to) 0.35
    Cu (to) 0.2
    Fe (to) 0.4
    Mg (from) 1
    Mg (to) 1.4
    Mn (from) 0.05
    Mn (to) 0.5
    Other 0,05
    Rest Aluminium
    Si (from) 0
    Si (to) 0.35
    Ti footnote reference a)
    Total 0,15
    Zn (from) 4
    Zn (to) 5
    Zr footnote reference a)

    0,08 – 0,25 Zr + Ti

  • Chemical surface treatment
    Anodise - decorative 3
    Anodising - protective anodising 2
    Chromating 2
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
  • Corrosion resistance
    Normal atmosphere 3
    Seawater atmosphere 4
  • Cutting
    Laser cutting 3
    Plasma cutting 3
    Sawing 2
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 No
  • Forming
    Bending 2
    Bending delivery conditions O
    Deep drawing (conditional) 2
    Deep drawing conditions O
    Drop forging 2
    Extruding 2
    Impact extrusion 3
    Impact extrusion conditions O
    Open die forging 2
    Press 3
    Press conditions O
    Upsetting (Conditional) 2
    Upsetting conditions O
  • Heat treatment - Softannealing
    Heating time max. 3 h
    Heating time min. 2 h
    Annealing temperature max. 420 °C
    Annealing temperature min. 400 °C
    Cooling conditions ≤ 30°C/h to 250°C + 3 – 5 hours
    hold time, below 250°C in air
  • Heat treatment - Solution annealing
    Quenching air
    Solution annealing max. 485 °C
    Solution annealing min. 460 °C
  • Machining / Machinability
    Eroding 1
    Etching 2
    hardened 2
    Photo etching 2
    soft annealed 3
  • Material
    Colorcode Hellrosa (RAL 3015)
    Material chemically EN 573-3 Al Zn4,5 Mg1
    DIN 3.4335
    DIN (old designation) Al Zn4,5 Mg1
    France AFNOR A-Z5G
    Italy UNI 9007/1
    Norway 17,410
    Spain L-3741
    Sweden 144,425
    United Kingdom BS H17
  • Mechanical surface treatment
    Blasting 1
    Brushing 2
    Dessinating 1
    Grinding 2
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 5
    Laminating 2
    Painting / Coating 2
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.1 K⁻¹10⁻⁶
    Coefficient of thermal expansion from 20 to 200°C 24 K⁻¹10⁻⁶
    Coefficient of thermal expansion from 20 to 300°C 25 K⁻¹10⁻⁶
    Coefficient of thermal expansion from -50 to 20°C 21.4 K⁻¹10⁻⁶
    Density 2.77 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 19 m/Ω*mm²
    Modulus of elasticity 70 GPa
    Shear modulus 26.4 GPa
    Specific heat 875 J/(kg·K)
    Thermal conductivity max. 160 W/m*K
    Thermal conductivity min. 130 W/m*K
  • Soldering
    Brazing 5
    Brazing with flux 5
    Friction soldering 3
    Soft soldering 5
    Soft soldering with flux 5
  • Welding
    Friction stir welding 2
    Friction welding 2
    Gas 3
    Laser 2
    MIG 1
    Resistance spot welding 5
    TIG 2
    welding additives

    • SG-Al Mg4,5 Mn
    • SG-Al Mg4,5 Mn Zr
    • SG-Al Mg5
  • Aviation
    Aviation No
  • Chemical specifications
    Cr (from) 0.1
    Cr (to) 0.35
    Cu (to) 0.2
    Fe (to) 0.4
    Mg (from) 1
    Mg (to) 1.4
    Mn (from) 0.05
    Mn (to) 0.5
    Other 0,05
    Rest Aluminium
    Si (from) 0
    Si (to) 0.35
    Ti footnote reference a)
    Total 0,15
    Zn (from) 4
    Zn (to) 5
    Zr footnote reference a)

    0,08 – 0,25 Zr + Ti

  • Chemical surface treatment
    Anodise - decorative 3
    Anodising - protective anodising 2
    Chromating 2
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
  • Corrosion resistance
    Normal atmosphere 3
    Seawater atmosphere 4
  • Cutting
    Laser cutting 3
    Plasma cutting 3
    Sawing 2
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 No
  • Forming
    Bending 2
    Bending delivery conditions O
    Deep drawing (conditional) 2
    Deep drawing conditions O
    Drop forging 2
    Extruding 2
    Impact extrusion 3
    Impact extrusion conditions O
    Open die forging 2
    Press 3
    Press conditions O
    Upsetting (Conditional) 2
    Upsetting conditions O
  • Heat treatment - Softannealing
    Heating time max. 3 h
    Heating time min. 2 h
    Annealing temperature max. 420 °C
    Annealing temperature min. 400 °C
    Cooling conditions ≤ 30°C/h to 250°C + 3 – 5 hours
    hold time, below 250°C in air
  • Heat treatment - Solution annealing
    Quenching air
    Solution annealing max. 485 °C
    Solution annealing min. 460 °C
  • Machining / Machinability
    Eroding 1
    Etching 2
    hardened 2
    Photo etching 2
    soft annealed 3
  • Material
    Colorcode Hellrosa (RAL 3015)
    Material chemically EN 573-3 Al Zn4,5 Mg1
    DIN 3.4335
    DIN (old designation) Al Zn4,5 Mg1
    France AFNOR A-Z5G
    Italy UNI 9007/1
    Norway 17,410
    Spain L-3741
    Sweden 144,425
    United Kingdom BS H17
  • Mechanical surface treatment
    Blasting 1
    Brushing 2
    Dessinating 1
    Grinding 2
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 5
    Laminating 2
    Painting / Coating 2
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.1 K⁻¹10⁻⁶
    Coefficient of thermal expansion from 20 to 200°C 24 K⁻¹10⁻⁶
    Coefficient of thermal expansion from 20 to 300°C 25 K⁻¹10⁻⁶
    Coefficient of thermal expansion from -50 to 20°C 21.4 K⁻¹10⁻⁶
    Density 2.77 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 19 m/Ω*mm²
    Modulus of elasticity 70 GPa
    Shear modulus 26.4 GPa
    Specific heat 875 J/(kg·K)
    Thermal conductivity max. 160 W/m*K
    Thermal conductivity min. 130 W/m*K
  • Soldering
    Brazing 5
    Brazing with flux 5
    Friction soldering 3
    Soft soldering 5
    Soft soldering with flux 5
  • Welding
    Friction stir welding 2
    Friction welding 2
    Gas 3
    Laser 2
    MIG 1
    Resistance spot welding 5
    TIG 2
    welding additives

    • SG-Al Mg4,5 Mn
    • SG-Al Mg4,5 Mn Zr
    • SG-Al Mg5

1 very good
2 good
3 moderate
4 poor
5 unsuited
0 Not specified

More questions about BIKAR?

Information about BIKAR, our product range and our service can be found here:

ABOUT OUR COMPANY