Our factories
Production
Innovation
Our semi-finished products
Certification
Sustainability
Trade fairs & events
FAQ
EN AW-5754
ring
- Form ring
- Material Aluminum
- Material EN AW-5754
- Material chemically EN 573-3 Al Mg3
- DIN 3.3535
BIKAR Metals companies
Container and apparatus construction
Tank and boiler construction
Shipbuilding
Panelling
| Aviation | No |
| Cr (to) | 0,3 |
| Cu (to) | 0,1 |
| Fe (to) | 0,4 |
| Mg (from) | 2,6 |
| Mg (to) | 3,6 |
| Mn (to) | 0,5 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0,4 |
| Ti (to) | 0,15 |
| Total | 0,15 |
| Zn (to) | 0,2 |
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4,5 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 1 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Drop forging | 3 |
| Extruding | 4 |
| Impact extrusion | 4 |
| Open die forging | 2 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| dimensional stability | 3 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 3 |
| Colorcode | Verkehrsgelb (RAL 1023) |
| Material chemically EN 573-3 | Al Mg3 |
| DIN | 3,3535 |
| DIN (old designation) | Al Mg3 |
| France AFNOR | A-G3M |
| Spain | L-3390 |
| Sweden | 144.133 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 1 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 3 |
| Laminating | 2 |
| Painting / Coating | 3 |
| Coefficient of thermal expansion from 20 to 100°C | 23.9 K⁻¹10⁻⁶ |
| Density | 2.67 g/cm³ |
| Electrical conductivity max. | 23 m/Ω*mm² |
| Electrical conductivity min. | 20 m/Ω*mm² |
| Modulus of elasticity | 70.5 GPa |
| Shear modulus | 26.5 GPa |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 140 W/m*K |
| Brazing | 4 |
| Brazing with flux | 4 |
| Friction soldering | 3 |
| Soft soldering | 5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 1 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 1 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0,3 |
| Cu (to) | 0,1 |
| Fe (to) | 0,4 |
| Mg (from) | 2,6 |
| Mg (to) | 3,6 |
| Mn (to) | 0,5 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0,4 |
| Ti (to) | 0,15 |
| Total | 0,15 |
| Zn (to) | 0,2 |
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4,5 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 1 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Drop forging | 3 |
| Extruding | 4 |
| Impact extrusion | 4 |
| Open die forging | 2 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| dimensional stability | 3 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 3 |
| Colorcode | Verkehrsgelb (RAL 1023) |
| Material chemically EN 573-3 | Al Mg3 |
| DIN | 3,3535 |
| DIN (old designation) | Al Mg3 |
| France AFNOR | A-G3M |
| Spain | L-3390 |
| Sweden | 144.133 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 1 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 3 |
| Laminating | 2 |
| Painting / Coating | 3 |
| Coefficient of thermal expansion from 20 to 100°C | 23.9 K⁻¹10⁻⁶ |
| Density | 2.67 g/cm³ |
| Electrical conductivity max. | 23 m/Ω*mm² |
| Electrical conductivity min. | 20 m/Ω*mm² |
| Modulus of elasticity | 70.5 GPa |
| Shear modulus | 26.5 GPa |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 140 W/m*K |
| Brazing | 4 |
| Brazing with flux | 4 |
| Friction soldering | 3 |
| Soft soldering | 5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 1 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 1 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0,3 |
| Cu (to) | 0,1 |
| Fe (to) | 0,4 |
| Mg (from) | 2,6 |
| Mg (to) | 3,6 |
| Mn (to) | 0,5 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0,4 |
| Ti (to) | 0,15 |
| Total | 0,15 |
| Zn (to) | 0,2 |
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4,5 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 1 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Drop forging | 3 |
| Extruding | 4 |
| Impact extrusion | 4 |
| Open die forging | 2 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| dimensional stability | 3 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 3 |
| Colorcode | Verkehrsgelb (RAL 1023) |
| Material chemically EN 573-3 | Al Mg3 |
| DIN | 3,3535 |
| DIN (old designation) | Al Mg3 |
| France AFNOR | A-G3M |
| Spain | L-3390 |
| Sweden | 144.133 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 1 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 3 |
| Laminating | 2 |
| Painting / Coating | 3 |
| Coefficient of thermal expansion from 20 to 100°C | 23.9 K⁻¹10⁻⁶ |
| Density | 2.67 g/cm³ |
| Electrical conductivity max. | 23 m/Ω*mm² |
| Electrical conductivity min. | 20 m/Ω*mm² |
| Modulus of elasticity | 70.5 GPa |
| Shear modulus | 26.5 GPa |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 140 W/m*K |
| Brazing | 4 |
| Brazing with flux | 4 |
| Friction soldering | 3 |
| Soft soldering | 5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 1 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 1 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0,3 |
| Cu (to) | 0,1 |
| Fe (to) | 0,4 |
| Mg (from) | 2,6 |
| Mg (to) | 3,6 |
| Mn (to) | 0,5 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0,4 |
| Ti (to) | 0,15 |
| Total | 0,15 |
| Zn (to) | 0,2 |
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4,5 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 1 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Drop forging | 3 |
| Extruding | 4 |
| Impact extrusion | 4 |
| Open die forging | 2 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| dimensional stability | 3 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 3 |
| Colorcode | Verkehrsgelb (RAL 1023) |
| Material chemically EN 573-3 | Al Mg3 |
| DIN | 3,3535 |
| DIN (old designation) | Al Mg3 |
| France AFNOR | A-G3M |
| Spain | L-3390 |
| Sweden | 144.133 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 1 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 3 |
| Laminating | 2 |
| Painting / Coating | 3 |
| Coefficient of thermal expansion from 20 to 100°C | 23.9 K⁻¹10⁻⁶ |
| Density | 2.67 g/cm³ |
| Electrical conductivity max. | 23 m/Ω*mm² |
| Electrical conductivity min. | 20 m/Ω*mm² |
| Modulus of elasticity | 70.5 GPa |
| Shear modulus | 26.5 GPa |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 140 W/m*K |
| Brazing | 4 |
| Brazing with flux | 4 |
| Friction soldering | 3 |
| Soft soldering | 5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 1 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 1 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0,3 |
| Cu (to) | 0,1 |
| Fe (to) | 0,4 |
| Mg (from) | 2,6 |
| Mg (to) | 3,6 |
| Mn (to) | 0,5 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0,4 |
| Ti (to) | 0,15 |
| Total | 0,15 |
| Zn (to) | 0,2 |
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4,5 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 1 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Drop forging | 3 |
| Extruding | 4 |
| Impact extrusion | 4 |
| Open die forging | 2 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| dimensional stability | 3 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 3 |
| Colorcode | Verkehrsgelb (RAL 1023) |
| Material chemically EN 573-3 | Al Mg3 |
| DIN | 3,3535 |
| DIN (old designation) | Al Mg3 |
| France AFNOR | A-G3M |
| Spain | L-3390 |
| Sweden | 144.133 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 1 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 3 |
| Laminating | 2 |
| Painting / Coating | 3 |
| Coefficient of thermal expansion from 20 to 100°C | 23.9 K⁻¹10⁻⁶ |
| Density | 2.67 g/cm³ |
| Electrical conductivity max. | 23 m/Ω*mm² |
| Electrical conductivity min. | 20 m/Ω*mm² |
| Modulus of elasticity | 70.5 GPa |
| Shear modulus | 26.5 GPa |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 140 W/m*K |
| Brazing | 4 |
| Brazing with flux | 4 |
| Friction soldering | 3 |
| Soft soldering | 5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 1 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 1 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0,3 |
| Cu (to) | 0,1 |
| Fe (to) | 0,4 |
| Mg (from) | 2,6 |
| Mg (to) | 3,6 |
| Mn (to) | 0,5 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0,4 |
| Ti (to) | 0,15 |
| Total | 0,15 |
| Zn (to) | 0,2 |
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4,5 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 1 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Drop forging | 3 |
| Extruding | 4 |
| Impact extrusion | 4 |
| Open die forging | 2 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| dimensional stability | 3 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 3 |
| Colorcode | Verkehrsgelb (RAL 1023) |
| Material chemically EN 573-3 | Al Mg3 |
| DIN | 3,3535 |
| DIN (old designation) | Al Mg3 |
| France AFNOR | A-G3M |
| Spain | L-3390 |
| Sweden | 144.133 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 1 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 3 |
| Laminating | 2 |
| Painting / Coating | 3 |
| Coefficient of thermal expansion from 20 to 100°C | 23.9 K⁻¹10⁻⁶ |
| Density | 2.67 g/cm³ |
| Electrical conductivity max. | 23 m/Ω*mm² |
| Electrical conductivity min. | 20 m/Ω*mm² |
| Modulus of elasticity | 70.5 GPa |
| Shear modulus | 26.5 GPa |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 140 W/m*K |
| Brazing | 4 |
| Brazing with flux | 4 |
| Friction soldering | 3 |
| Soft soldering | 5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 1 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 1 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0,3 |
| Cu (to) | 0,1 |
| Fe (to) | 0,4 |
| Mg (from) | 2,6 |
| Mg (to) | 3,6 |
| Mn (to) | 0,5 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0,4 |
| Ti (to) | 0,15 |
| Total | 0,15 |
| Zn (to) | 0,2 |
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4,5 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 1 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Drop forging | 3 |
| Extruding | 4 |
| Impact extrusion | 4 |
| Open die forging | 2 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| dimensional stability | 3 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 3 |
| Colorcode | Verkehrsgelb (RAL 1023) |
| Material chemically EN 573-3 | Al Mg3 |
| DIN | 3,3535 |
| DIN (old designation) | Al Mg3 |
| France AFNOR | A-G3M |
| Spain | L-3390 |
| Sweden | 144.133 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 1 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 3 |
| Laminating | 2 |
| Painting / Coating | 3 |
| Coefficient of thermal expansion from 20 to 100°C | 23.9 K⁻¹10⁻⁶ |
| Density | 2.67 g/cm³ |
| Electrical conductivity max. | 23 m/Ω*mm² |
| Electrical conductivity min. | 20 m/Ω*mm² |
| Modulus of elasticity | 70.5 GPa |
| Shear modulus | 26.5 GPa |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 140 W/m*K |
| Brazing | 4 |
| Brazing with flux | 4 |
| Friction soldering | 3 |
| Soft soldering | 5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 1 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 1 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0,3 |
| Cu (to) | 0,1 |
| Fe (to) | 0,4 |
| Mg (from) | 2,6 |
| Mg (to) | 3,6 |
| Mn (to) | 0,5 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0,4 |
| Ti (to) | 0,15 |
| Total | 0,15 |
| Zn (to) | 0,2 |
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4,5 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 1 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Drop forging | 3 |
| Extruding | 4 |
| Impact extrusion | 4 |
| Open die forging | 2 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| dimensional stability | 3 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 3 |
| Colorcode | Verkehrsgelb (RAL 1023) |
| Material chemically EN 573-3 | Al Mg3 |
| DIN | 3,3535 |
| DIN (old designation) | Al Mg3 |
| France AFNOR | A-G3M |
| Spain | L-3390 |
| Sweden | 144.133 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 1 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 3 |
| Laminating | 2 |
| Painting / Coating | 3 |
| Coefficient of thermal expansion from 20 to 100°C | 23.9 K⁻¹10⁻⁶ |
| Density | 2.67 g/cm³ |
| Electrical conductivity max. | 23 m/Ω*mm² |
| Electrical conductivity min. | 20 m/Ω*mm² |
| Modulus of elasticity | 70.5 GPa |
| Shear modulus | 26.5 GPa |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 140 W/m*K |
| Brazing | 4 |
| Brazing with flux | 4 |
| Friction soldering | 3 |
| Soft soldering | 5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 1 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 1 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0,3 |
| Cu (to) | 0,1 |
| Fe (to) | 0,4 |
| Mg (from) | 2,6 |
| Mg (to) | 3,6 |
| Mn (to) | 0,5 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0,4 |
| Ti (to) | 0,15 |
| Total | 0,15 |
| Zn (to) | 0,2 |
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4,5 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 1 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Drop forging | 3 |
| Extruding | 4 |
| Impact extrusion | 4 |
| Open die forging | 2 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| dimensional stability | 3 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 3 |
| Colorcode | Verkehrsgelb (RAL 1023) |
| Material chemically EN 573-3 | Al Mg3 |
| DIN | 3,3535 |
| DIN (old designation) | Al Mg3 |
| France AFNOR | A-G3M |
| Spain | L-3390 |
| Sweden | 144.133 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 1 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 3 |
| Laminating | 2 |
| Painting / Coating | 3 |
| Coefficient of thermal expansion from 20 to 100°C | 23.9 K⁻¹10⁻⁶ |
| Density | 2.67 g/cm³ |
| Electrical conductivity max. | 23 m/Ω*mm² |
| Electrical conductivity min. | 20 m/Ω*mm² |
| Modulus of elasticity | 70.5 GPa |
| Shear modulus | 26.5 GPa |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 140 W/m*K |
| Brazing | 4 |
| Brazing with flux | 4 |
| Friction soldering | 3 |
| Soft soldering | 5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 1 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 1 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0,3 |
| Cu (to) | 0,1 |
| Fe (to) | 0,4 |
| Mg (from) | 2,6 |
| Mg (to) | 3,6 |
| Mn (to) | 0,5 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0,4 |
| Ti (to) | 0,15 |
| Total | 0,15 |
| Zn (to) | 0,2 |
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4,5 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 1 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Drop forging | 3 |
| Extruding | 4 |
| Impact extrusion | 4 |
| Open die forging | 2 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| dimensional stability | 3 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 3 |
| Colorcode | Verkehrsgelb (RAL 1023) |
| Material chemically EN 573-3 | Al Mg3 |
| DIN | 3,3535 |
| DIN (old designation) | Al Mg3 |
| France AFNOR | A-G3M |
| Spain | L-3390 |
| Sweden | 144.133 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 1 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 3 |
| Laminating | 2 |
| Painting / Coating | 3 |
| Coefficient of thermal expansion from 20 to 100°C | 23.9 K⁻¹10⁻⁶ |
| Density | 2.67 g/cm³ |
| Electrical conductivity max. | 23 m/Ω*mm² |
| Electrical conductivity min. | 20 m/Ω*mm² |
| Modulus of elasticity | 70.5 GPa |
| Shear modulus | 26.5 GPa |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 140 W/m*K |
| Brazing | 4 |
| Brazing with flux | 4 |
| Friction soldering | 3 |
| Soft soldering | 5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 1 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 1 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0,3 |
| Cu (to) | 0,1 |
| Fe (to) | 0,4 |
| Mg (from) | 2,6 |
| Mg (to) | 3,6 |
| Mn (to) | 0,5 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0,4 |
| Ti (to) | 0,15 |
| Total | 0,15 |
| Zn (to) | 0,2 |
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4,5 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 1 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Drop forging | 3 |
| Extruding | 4 |
| Impact extrusion | 4 |
| Open die forging | 2 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| dimensional stability | 3 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 3 |
| Colorcode | Verkehrsgelb (RAL 1023) |
| Material chemically EN 573-3 | Al Mg3 |
| DIN | 3,3535 |
| DIN (old designation) | Al Mg3 |
| France AFNOR | A-G3M |
| Spain | L-3390 |
| Sweden | 144.133 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 1 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 3 |
| Laminating | 2 |
| Painting / Coating | 3 |
| Coefficient of thermal expansion from 20 to 100°C | 23.9 K⁻¹10⁻⁶ |
| Density | 2.67 g/cm³ |
| Electrical conductivity max. | 23 m/Ω*mm² |
| Electrical conductivity min. | 20 m/Ω*mm² |
| Modulus of elasticity | 70.5 GPa |
| Shear modulus | 26.5 GPa |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 140 W/m*K |
| Brazing | 4 |
| Brazing with flux | 4 |
| Friction soldering | 3 |
| Soft soldering | 5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 1 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 1 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0,3 |
| Cu (to) | 0,1 |
| Fe (to) | 0,4 |
| Mg (from) | 2,6 |
| Mg (to) | 3,6 |
| Mn (to) | 0,5 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0,4 |
| Ti (to) | 0,15 |
| Total | 0,15 |
| Zn (to) | 0,2 |
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4,5 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 1 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Drop forging | 3 |
| Extruding | 4 |
| Impact extrusion | 4 |
| Open die forging | 2 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| dimensional stability | 3 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 3 |
| Colorcode | Verkehrsgelb (RAL 1023) |
| Material chemically EN 573-3 | Al Mg3 |
| DIN | 3,3535 |
| DIN (old designation) | Al Mg3 |
| France AFNOR | A-G3M |
| Spain | L-3390 |
| Sweden | 144.133 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 1 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 3 |
| Laminating | 2 |
| Painting / Coating | 3 |
| Coefficient of thermal expansion from 20 to 100°C | 23.9 K⁻¹10⁻⁶ |
| Density | 2.67 g/cm³ |
| Electrical conductivity max. | 23 m/Ω*mm² |
| Electrical conductivity min. | 20 m/Ω*mm² |
| Modulus of elasticity | 70.5 GPa |
| Shear modulus | 26.5 GPa |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 140 W/m*K |
| Brazing | 4 |
| Brazing with flux | 4 |
| Friction soldering | 3 |
| Soft soldering | 5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 1 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 1 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0,3 |
| Cu (to) | 0,1 |
| Fe (to) | 0,4 |
| Mg (from) | 2,6 |
| Mg (to) | 3,6 |
| Mn (to) | 0,5 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0,4 |
| Ti (to) | 0,15 |
| Total | 0,15 |
| Zn (to) | 0,2 |
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4,5 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 1 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Drop forging | 3 |
| Extruding | 4 |
| Impact extrusion | 4 |
| Open die forging | 2 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| dimensional stability | 3 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 3 |
| Colorcode | Verkehrsgelb (RAL 1023) |
| Material chemically EN 573-3 | Al Mg3 |
| DIN | 3,3535 |
| DIN (old designation) | Al Mg3 |
| France AFNOR | A-G3M |
| Spain | L-3390 |
| Sweden | 144.133 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 1 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 3 |
| Laminating | 2 |
| Painting / Coating | 3 |
| Coefficient of thermal expansion from 20 to 100°C | 23.9 K⁻¹10⁻⁶ |
| Density | 2.67 g/cm³ |
| Electrical conductivity max. | 23 m/Ω*mm² |
| Electrical conductivity min. | 20 m/Ω*mm² |
| Modulus of elasticity | 70.5 GPa |
| Shear modulus | 26.5 GPa |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 140 W/m*K |
| Brazing | 4 |
| Brazing with flux | 4 |
| Friction soldering | 3 |
| Soft soldering | 5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 1 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 1 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0,3 |
| Cu (to) | 0,1 |
| Fe (to) | 0,4 |
| Mg (from) | 2,6 |
| Mg (to) | 3,6 |
| Mn (to) | 0,5 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0,4 |
| Ti (to) | 0,15 |
| Total | 0,15 |
| Zn (to) | 0,2 |
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 4,5 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 1 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 3 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Drop forging | 3 |
| Extruding | 4 |
| Impact extrusion | 4 |
| Open die forging | 2 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | H12 |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| dimensional stability | 3 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 3 |
| Colorcode | Verkehrsgelb (RAL 1023) |
| Material chemically EN 573-3 | Al Mg3 |
| DIN | 3,3535 |
| DIN (old designation) | Al Mg3 |
| France AFNOR | A-G3M |
| Spain | L-3390 |
| Sweden | 144.133 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 1 |
| Galvanising | 2 |
| Nickel coating | 2 |
| Thermal spraying | 4 |
| Enamelling | 3 |
| Laminating | 2 |
| Painting / Coating | 3 |
| Coefficient of thermal expansion from 20 to 100°C | 23.9 K⁻¹10⁻⁶ |
| Density | 2.67 g/cm³ |
| Electrical conductivity max. | 23 m/Ω*mm² |
| Electrical conductivity min. | 20 m/Ω*mm² |
| Modulus of elasticity | 70.5 GPa |
| Shear modulus | 26.5 GPa |
| Thermal conductivity max. | 160 W/m*K |
| Thermal conductivity min. | 140 W/m*K |
| Brazing | 4 |
| Brazing with flux | 4 |
| Friction soldering | 3 |
| Soft soldering | 5 |
| Soft soldering with flux | 4 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 1 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 1 |
| welding additives |
|
1 very good
2 good
3 moderate
4 poor
5 unsuited
0 Not specified
