EN AW-5754

square bar

A technical illustration of the product with dimensions of the material EN AW-5754 from the material Aluminum in the shape square bar
  • Form square bar
  • Material Aluminum
  • Material EN AW-5754
  • Material chemically EN 573-3 Al Mg3
  • DIN 3.3535

No product available for your selection.

An image of the material EN AW-5754 from the material Aluminum in the shape square bar
A technical illustration of the product of the material EN AW-5754 from the material Aluminum in the shape square bar

Areas of application

Container and apparatus construction

Tank and boiler construction

Shipbuilding

Areas of application

Panelling

Features of this material

  • Very good welding properties
  • Very good corrosion resistance
  • Very good anodising properties for EQ

Features of this material

  • Good formability

Information about the material

  • Aviation
    Aviation No
  • Chemical specifications
    Cr (to) 0.3
    Cu (to) 0.1
    Fe (to) 0.4
    Mg (from) 2.6
    Mg (to) 3.6
    Mn (to) 0.5
    Other 0,05
    Rest Aluminium
    Si (to) 0.4
    Ti (to) 0.15
    Total 0,15
    Zn (to) 0.2
    a) Includes all listed elements for which no limits are given. b) The sum of these "Other impurities" whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation. (c) Mn + Cr max. 0,10 - 0,60
  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 1
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
    special anodising quality EQ 1
  • Corrosion resistance
    Normal atmosphere 1
    Seawater atmosphere 1
  • Cutting
    Laser cutting 3
    Plasma cutting 2
    Sawing 3
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 Yes
  • Forming
    Bending 2
    Deep drawing (conditional) 2
    Deep drawing conditions O
    Drop forging 3
    Extruding 4
    Impact extrusion 4
    Open die forging 2
    Press 3
    Upsetting (Conditional) 2
    Upsetting conditions H12
  • Heat treatment - Softannealing
    Heating time max. 2 h
    Heating time min. 1 h
    Annealing temperature max. 380 °C
    Annealing temperature min. 360 °C
    Cooling conditions kiln - uncontrolled
  • Machining / Machinability
    cold worked 2
    dimensional stability 3
    Eroding 1
    Etching 2
    Photo etching 2
    soft annealed 3
  • Material
    Colorcode Verkehrsgelb (RAL 1023)
    Material chemically EN 573-3 Al Mg3
    DIN 3.3535
    DIN (old designation) Al Mg3
    France AFNOR A-G3M
    Spain L-3390
    Sweden 144,133
  • Mechanical surface treatment
    Blasting 1
    Brushing 3
    Dessinating 1
    Grinding 3
    Polishing 1
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 3
    Laminating 2
    Painting / Coating 3
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.9 K⁻¹10⁻⁶
    Density 2.67 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 20 m/Ω*mm²
    Modulus of elasticity 70.5 GPa
    Shear modulus 26.5 GPa
    Thermal conductivity max. 160 W/m*K
    Thermal conductivity min. 140 W/m*K
  • Soldering
    Brazing 4
    Brazing with flux 4
    Friction soldering 3
    Soft soldering 5
    Soft soldering with flux 4
  • Welding
    Friction stir welding 2
    Friction welding 2
    Gas 2
    Laser 2
    MIG 1
    Plasma 2
    Resistance spot welding 3
    TIG 1
    welding additives

    • SG-Al Mg3
    • SG-Al Mg5

  • Aviation
    Aviation No
  • Chemical specifications
    Cr (to) 0.3
    Cu (to) 0.1
    Fe (to) 0.4
    Mg (from) 2.6
    Mg (to) 3.6
    Mn (to) 0.5
    Other 0,05
    Rest Aluminium
    Si (to) 0.4
    Ti (to) 0.15
    Total 0,15
    Zn (to) 0.2
    a) Includes all listed elements for which no limits are given. b) The sum of these "Other impurities" whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation. (c) Mn + Cr max. 0,10 - 0,60
  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 1
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
    special anodising quality EQ 1
  • Corrosion resistance
    Normal atmosphere 1
    Seawater atmosphere 1
  • Cutting
    Laser cutting 3
    Plasma cutting 2
    Sawing 3
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 Yes
  • Forming
    Bending 2
    Deep drawing (conditional) 2
    Deep drawing conditions O
    Drop forging 3
    Extruding 4
    Impact extrusion 4
    Open die forging 2
    Press 3
    Upsetting (Conditional) 2
    Upsetting conditions H12
  • Heat treatment - Softannealing
    Heating time max. 2 h
    Heating time min. 1 h
    Annealing temperature max. 380 °C
    Annealing temperature min. 360 °C
    Cooling conditions kiln - uncontrolled
  • Machining / Machinability
    cold worked 2
    dimensional stability 3
    Eroding 1
    Etching 2
    Photo etching 2
    soft annealed 3
  • Material
    Colorcode Verkehrsgelb (RAL 1023)
    Material chemically EN 573-3 Al Mg3
    DIN 3.3535
    DIN (old designation) Al Mg3
    France AFNOR A-G3M
    Spain L-3390
    Sweden 144,133
  • Mechanical surface treatment
    Blasting 1
    Brushing 3
    Dessinating 1
    Grinding 3
    Polishing 1
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 3
    Laminating 2
    Painting / Coating 3
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.9 K⁻¹10⁻⁶
    Density 2.67 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 20 m/Ω*mm²
    Modulus of elasticity 70.5 GPa
    Shear modulus 26.5 GPa
    Thermal conductivity max. 160 W/m*K
    Thermal conductivity min. 140 W/m*K
  • Soldering
    Brazing 4
    Brazing with flux 4
    Friction soldering 3
    Soft soldering 5
    Soft soldering with flux 4
  • Welding
    Friction stir welding 2
    Friction welding 2
    Gas 2
    Laser 2
    MIG 1
    Plasma 2
    Resistance spot welding 3
    TIG 1
    welding additives

    • SG-Al Mg3
    • SG-Al Mg5

  • Aviation
    Aviation No
  • Chemical specifications
    Cr (to) 0.3
    Cu (to) 0.1
    Fe (to) 0.4
    Mg (from) 2.6
    Mg (to) 3.6
    Mn (to) 0.5
    Other 0,05
    Rest Aluminium
    Si (to) 0.4
    Ti (to) 0.15
    Total 0,15
    Zn (to) 0.2
    a) Includes all listed elements for which no limits are given. b) The sum of these "Other impurities" whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation. (c) Mn + Cr max. 0,10 - 0,60
  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 1
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
    special anodising quality EQ 1
  • Corrosion resistance
    Normal atmosphere 1
    Seawater atmosphere 1
  • Cutting
    Laser cutting 3
    Plasma cutting 2
    Sawing 3
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 Yes
  • Forming
    Bending 2
    Deep drawing (conditional) 2
    Deep drawing conditions O
    Drop forging 3
    Extruding 4
    Impact extrusion 4
    Open die forging 2
    Press 3
    Upsetting (Conditional) 2
    Upsetting conditions H12
  • Heat treatment - Softannealing
    Heating time max. 2 h
    Heating time min. 1 h
    Annealing temperature max. 380 °C
    Annealing temperature min. 360 °C
    Cooling conditions kiln - uncontrolled
  • Machining / Machinability
    cold worked 2
    dimensional stability 3
    Eroding 1
    Etching 2
    Photo etching 2
    soft annealed 3
  • Material
    Colorcode Verkehrsgelb (RAL 1023)
    Material chemically EN 573-3 Al Mg3
    DIN 3.3535
    DIN (old designation) Al Mg3
    France AFNOR A-G3M
    Spain L-3390
    Sweden 144,133
  • Mechanical surface treatment
    Blasting 1
    Brushing 3
    Dessinating 1
    Grinding 3
    Polishing 1
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 3
    Laminating 2
    Painting / Coating 3
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.9 K⁻¹10⁻⁶
    Density 2.67 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 20 m/Ω*mm²
    Modulus of elasticity 70.5 GPa
    Shear modulus 26.5 GPa
    Thermal conductivity max. 160 W/m*K
    Thermal conductivity min. 140 W/m*K
  • Soldering
    Brazing 4
    Brazing with flux 4
    Friction soldering 3
    Soft soldering 5
    Soft soldering with flux 4
  • Welding
    Friction stir welding 2
    Friction welding 2
    Gas 2
    Laser 2
    MIG 1
    Plasma 2
    Resistance spot welding 3
    TIG 1
    welding additives

    • SG-Al Mg3
    • SG-Al Mg5

  • Aviation
    Aviation No
  • Chemical specifications
    Cr (to) 0.3
    Cu (to) 0.1
    Fe (to) 0.4
    Mg (from) 2.6
    Mg (to) 3.6
    Mn (to) 0.5
    Other 0,05
    Rest Aluminium
    Si (to) 0.4
    Ti (to) 0.15
    Total 0,15
    Zn (to) 0.2
    a) Includes all listed elements for which no limits are given. b) The sum of these "Other impurities" whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation. (c) Mn + Cr max. 0,10 - 0,60
  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 1
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
    special anodising quality EQ 1
  • Corrosion resistance
    Normal atmosphere 1
    Seawater atmosphere 1
  • Cutting
    Laser cutting 3
    Plasma cutting 2
    Sawing 3
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 Yes
  • Forming
    Bending 2
    Deep drawing (conditional) 2
    Deep drawing conditions O
    Drop forging 3
    Extruding 4
    Impact extrusion 4
    Open die forging 2
    Press 3
    Upsetting (Conditional) 2
    Upsetting conditions H12
  • Heat treatment - Softannealing
    Heating time max. 2 h
    Heating time min. 1 h
    Annealing temperature max. 380 °C
    Annealing temperature min. 360 °C
    Cooling conditions kiln - uncontrolled
  • Machining / Machinability
    cold worked 2
    dimensional stability 3
    Eroding 1
    Etching 2
    Photo etching 2
    soft annealed 3
  • Material
    Colorcode Verkehrsgelb (RAL 1023)
    Material chemically EN 573-3 Al Mg3
    DIN 3.3535
    DIN (old designation) Al Mg3
    France AFNOR A-G3M
    Spain L-3390
    Sweden 144,133
  • Mechanical surface treatment
    Blasting 1
    Brushing 3
    Dessinating 1
    Grinding 3
    Polishing 1
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 3
    Laminating 2
    Painting / Coating 3
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.9 K⁻¹10⁻⁶
    Density 2.67 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 20 m/Ω*mm²
    Modulus of elasticity 70.5 GPa
    Shear modulus 26.5 GPa
    Thermal conductivity max. 160 W/m*K
    Thermal conductivity min. 140 W/m*K
  • Soldering
    Brazing 4
    Brazing with flux 4
    Friction soldering 3
    Soft soldering 5
    Soft soldering with flux 4
  • Welding
    Friction stir welding 2
    Friction welding 2
    Gas 2
    Laser 2
    MIG 1
    Plasma 2
    Resistance spot welding 3
    TIG 1
    welding additives

    • SG-Al Mg3
    • SG-Al Mg5

  • Aviation
    Aviation No
  • Chemical specifications
    Cr (to) 0.3
    Cu (to) 0.1
    Fe (to) 0.4
    Mg (from) 2.6
    Mg (to) 3.6
    Mn (to) 0.5
    Other 0,05
    Rest Aluminium
    Si (to) 0.4
    Ti (to) 0.15
    Total 0,15
    Zn (to) 0.2
    a) Includes all listed elements for which no limits are given. b) The sum of these "Other impurities" whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation. (c) Mn + Cr max. 0,10 - 0,60
  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 1
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
    special anodising quality EQ 1
  • Corrosion resistance
    Normal atmosphere 1
    Seawater atmosphere 1
  • Cutting
    Laser cutting 3
    Plasma cutting 2
    Sawing 3
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 Yes
  • Forming
    Bending 2
    Deep drawing (conditional) 2
    Deep drawing conditions O
    Drop forging 3
    Extruding 4
    Impact extrusion 4
    Open die forging 2
    Press 3
    Upsetting (Conditional) 2
    Upsetting conditions H12
  • Heat treatment - Softannealing
    Heating time max. 2 h
    Heating time min. 1 h
    Annealing temperature max. 380 °C
    Annealing temperature min. 360 °C
    Cooling conditions kiln - uncontrolled
  • Machining / Machinability
    cold worked 2
    dimensional stability 3
    Eroding 1
    Etching 2
    Photo etching 2
    soft annealed 3
  • Material
    Colorcode Verkehrsgelb (RAL 1023)
    Material chemically EN 573-3 Al Mg3
    DIN 3.3535
    DIN (old designation) Al Mg3
    France AFNOR A-G3M
    Spain L-3390
    Sweden 144,133
  • Mechanical surface treatment
    Blasting 1
    Brushing 3
    Dessinating 1
    Grinding 3
    Polishing 1
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 3
    Laminating 2
    Painting / Coating 3
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.9 K⁻¹10⁻⁶
    Density 2.67 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 20 m/Ω*mm²
    Modulus of elasticity 70.5 GPa
    Shear modulus 26.5 GPa
    Thermal conductivity max. 160 W/m*K
    Thermal conductivity min. 140 W/m*K
  • Soldering
    Brazing 4
    Brazing with flux 4
    Friction soldering 3
    Soft soldering 5
    Soft soldering with flux 4
  • Welding
    Friction stir welding 2
    Friction welding 2
    Gas 2
    Laser 2
    MIG 1
    Plasma 2
    Resistance spot welding 3
    TIG 1
    welding additives

    • SG-Al Mg3
    • SG-Al Mg5

  • Aviation
    Aviation No
  • Chemical specifications
    Cr (to) 0.3
    Cu (to) 0.1
    Fe (to) 0.4
    Mg (from) 2.6
    Mg (to) 3.6
    Mn (to) 0.5
    Other 0,05
    Rest Aluminium
    Si (to) 0.4
    Ti (to) 0.15
    Total 0,15
    Zn (to) 0.2
    a) Includes all listed elements for which no limits are given. b) The sum of these "Other impurities" whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation. (c) Mn + Cr max. 0,10 - 0,60
  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 1
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
    special anodising quality EQ 1
  • Corrosion resistance
    Normal atmosphere 1
    Seawater atmosphere 1
  • Cutting
    Laser cutting 3
    Plasma cutting 2
    Sawing 3
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 Yes
  • Forming
    Bending 2
    Deep drawing (conditional) 2
    Deep drawing conditions O
    Drop forging 3
    Extruding 4
    Impact extrusion 4
    Open die forging 2
    Press 3
    Upsetting (Conditional) 2
    Upsetting conditions H12
  • Heat treatment - Softannealing
    Heating time max. 2 h
    Heating time min. 1 h
    Annealing temperature max. 380 °C
    Annealing temperature min. 360 °C
    Cooling conditions kiln - uncontrolled
  • Machining / Machinability
    cold worked 2
    dimensional stability 3
    Eroding 1
    Etching 2
    Photo etching 2
    soft annealed 3
  • Material
    Colorcode Verkehrsgelb (RAL 1023)
    Material chemically EN 573-3 Al Mg3
    DIN 3.3535
    DIN (old designation) Al Mg3
    France AFNOR A-G3M
    Spain L-3390
    Sweden 144,133
  • Mechanical surface treatment
    Blasting 1
    Brushing 3
    Dessinating 1
    Grinding 3
    Polishing 1
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 3
    Laminating 2
    Painting / Coating 3
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.9 K⁻¹10⁻⁶
    Density 2.67 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 20 m/Ω*mm²
    Modulus of elasticity 70.5 GPa
    Shear modulus 26.5 GPa
    Thermal conductivity max. 160 W/m*K
    Thermal conductivity min. 140 W/m*K
  • Soldering
    Brazing 4
    Brazing with flux 4
    Friction soldering 3
    Soft soldering 5
    Soft soldering with flux 4
  • Welding
    Friction stir welding 2
    Friction welding 2
    Gas 2
    Laser 2
    MIG 1
    Plasma 2
    Resistance spot welding 3
    TIG 1
    welding additives

    • SG-Al Mg3
    • SG-Al Mg5

  • Aviation
    Aviation No
  • Chemical specifications
    Cr (to) 0.3
    Cu (to) 0.1
    Fe (to) 0.4
    Mg (from) 2.6
    Mg (to) 3.6
    Mn (to) 0.5
    Other 0,05
    Rest Aluminium
    Si (to) 0.4
    Ti (to) 0.15
    Total 0,15
    Zn (to) 0.2
    a) Includes all listed elements for which no limits are given. b) The sum of these "Other impurities" whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation. (c) Mn + Cr max. 0,10 - 0,60
  • Chemical surface treatment
    Anodise - decorative 2
    Anodising - protective anodising 1
    Cleaning / degreasing 2
    Hard anodising 2
    Phosphating 2
    Pickling 2
    Shining 4.5
    special anodising quality EQ 1
  • Corrosion resistance
    Normal atmosphere 1
    Seawater atmosphere 1
  • Cutting
    Laser cutting 3
    Plasma cutting 2
    Sawing 3
    Shear cutting 2
    Waterjet cutting 1
  • Food industry
    suitable according to DIN EN 602 Yes
  • Forming
    Bending 2
    Deep drawing (conditional) 2
    Deep drawing conditions O
    Drop forging 3
    Extruding 4
    Impact extrusion 4
    Open die forging 2
    Press 3
    Upsetting (Conditional) 2
    Upsetting conditions H12
  • Heat treatment - Softannealing
    Heating time max. 2 h
    Heating time min. 1 h
    Annealing temperature max. 380 °C
    Annealing temperature min. 360 °C
    Cooling conditions kiln - uncontrolled
  • Machining / Machinability
    cold worked 2
    dimensional stability 3
    Eroding 1
    Etching 2
    Photo etching 2
    soft annealed 3
  • Material
    Colorcode Verkehrsgelb (RAL 1023)
    Material chemically EN 573-3 Al Mg3
    DIN 3.3535
    DIN (old designation) Al Mg3
    France AFNOR A-G3M
    Spain L-3390
    Sweden 144,133
  • Mechanical surface treatment
    Blasting 1
    Brushing 3
    Dessinating 1
    Grinding 3
    Polishing 1
  • Metallic coating
    Galvanising 2
    Nickel coating 2
    Thermal spraying 4
  • Organic coating
    Enamelling 3
    Laminating 2
    Painting / Coating 3
  • physical properties
    Coefficient of thermal expansion from 20 to 100°C 23.9 K⁻¹10⁻⁶
    Density 2.67 g/cm³
    Electrical conductivity max. 23 m/Ω*mm²
    Electrical conductivity min. 20 m/Ω*mm²
    Modulus of elasticity 70.5 GPa
    Shear modulus 26.5 GPa
    Thermal conductivity max. 160 W/m*K
    Thermal conductivity min. 140 W/m*K
  • Soldering
    Brazing 4
    Brazing with flux 4
    Friction soldering 3
    Soft soldering 5
    Soft soldering with flux 4
  • Welding
    Friction stir welding 2
    Friction welding 2
    Gas 2
    Laser 2
    MIG 1
    Plasma 2
    Resistance spot welding 3
    TIG 1
    welding additives

    • SG-Al Mg3
    • SG-Al Mg5

1 very good
2 good
3 moderate
4 poor
5 unsuited
0 Not specified