Our factories
Production
Innovation
Our semi-finished products
Certification
Sustainability
Trade fairs & events
FAQ
EN AW-5005A
plate rolled
- Form plate rolled
- Material Aluminum
- Material EN AW-5005A
- Material chemically EN 573-3 Al Mg1 (C)
- DIN 3.3315
BIKAR Metals companies
Food industry (containers · boxes · packaging)
Building industry (panelling · roofing)
Furniture industry
Refrigeration and air conditioning systems
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
| Aviation | No |
| Cr (to) | 0.1 |
| Cu (to) | 0.05 |
| Fe (to) | 0.45 |
| Mg (from) | 0.7 |
| Mg (to) | 1.1 |
| Mn (to) | 0.15 |
| Other | 0,05 |
| Rest | Aluminium |
| Si (to) | 0.3 |
| Total | 0,15 |
| Zn (to) | 0.2 |
(a) Includes all listed elements for which no limits are given. (b) The sum of these 'other impurities' whose mass fraction is individually 0,010 % or more is expressed with two decimal places before the summation.
| Anodise - decorative | 2 |
| Anodising - protective anodising | 1 |
| Chromating | 2 |
| Cleaning / degreasing | 2 |
| Hard anodising | 2 |
| Phosphating | 2 |
| Pickling | 2 |
| Shining | 2 |
| special anodising quality EQ | 1 |
| Normal atmosphere | 1 |
| Seawater atmosphere | 2 |
| Laser cutting | 3 |
| Plasma cutting | 2 |
| Sawing | 4 |
| Shear cutting | 2 |
| Waterjet cutting | 1 |
| suitable according to DIN EN 602 | Yes |
| Bending | 2 |
| Deep drawing (conditional) | 2 |
| Deep drawing conditions | O |
| Extruding | 2 |
| Impact extrusion | 3 |
| Press | 3 |
| Upsetting (Conditional) | 2 |
| Upsetting conditions | O |
| Heating time max. | 2 h |
| Heating time min. | 1 h |
| Annealing temperature max. | 380 °C |
| Annealing temperature min. | 360 °C |
| Cooling conditions | kiln - uncontrolled |
| cold worked | 2 |
| Eroding | 1 |
| Etching | 2 |
| Photo etching | 2 |
| soft annealed | 4 |
| Material chemically EN 573-3 | Al Mg1 (C) |
| DIN | 3.3315 |
| DIN (old designation) | Al Mg1 |
| France AFNOR | A-G0,6 |
| Italy UNI | 9005/1 |
| Spain | L-3350 |
| Sweden | 144,106 |
| United Kingdom BS | N41 |
| Blasting | 1 |
| Brushing | 3 |
| Dessinating | 1 |
| Grinding | 3 |
| Polishing | 2 |
| Galvanising | 2 |
| Nickel coating | 1 |
| Thermal spraying | 3 |
| Enamelling | 2 |
| Laminating | 2 |
| Painting / Coating | 1 |
| Coefficient of thermal expansion from 20 to 100°C | 23.6 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 200°C | 24.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from 20 to 300°C | 25.5 K⁻¹10⁻⁶ |
| Coefficient of thermal expansion from -50 to 20°C | 21.8 K⁻¹10⁻⁶ |
| Density | 2.69 g/cm³ |
| Electrical conductivity max. | 31 m/Ω*mm² |
| Electrical conductivity min. | 23 m/Ω*mm² |
| Modulus of elasticity | 69.5 GPa |
| Shear modulus | 26.1 GPa |
| Thermal conductivity max. | 220 W/m*K |
| Thermal conductivity min. | 160 W/m*K |
| Brazing | 4 |
| Brazing with flux | 5 |
| Friction soldering | 2 |
| Soft soldering | 4 |
| Soft soldering with flux | 3 |
| Friction stir welding | 2 |
| Friction welding | 2 |
| Gas | 2 |
| Laser | 2 |
| MIG | 2 |
| Plasma | 2 |
| Resistance spot welding | 3 |
| TIG | 2 |
| welding additives |
|
1 very good
2 good
3 moderate
4 poor
5 unsuited
0 Not specified
